Stub End
Category: Buttweld Fittings

Stub End

Sch 80 Stainless Steel Stub Ends Dimensions/ Weight Chart And Check Type A Stub End Price List.

What Is Stub End In Piping?

ASME B16.9 Stainless Steel Stub End Dimensions differ with the fittings they go with. Stub ends are high quality, thermally stable, highly strong in mechanical strength and have long service life. There are different material made stubs but the Carbon Steel Stub End Fittings are most common. The Stub End differs mostly due to the material make and the types. The Stub End Type A is applied with standard lap joint flange. There are different specifications and classes such as Stub End Mss Sp 43.

 

 

Stainless Steel Stub Ends

 

ASME B16.9 Long And Short Stub End

 

Carbon Steel Stub End

 

 

Table of contents

  • Which One Will Be Used In Stub In Joint?
  • Which Two Common Type Of Stub End?
  • ASME B16.9 Stub Ends Can Be Ordered With Different Ends Finishing:
  • Lap Joint Stub End Specification
  • Stainless Steel Stub End Dimensions
  • MSS Sp 43 Stub End Dimensions
  • Lap Joint Flange Stub End Dimensions
  • Long Neck Stub End Dimensions
  • Short Pattern Stub End Dimensions
  • Carbon Steel Stub End Weight Chart
  • End Welding Bevels of Type A Stub End
  • Lap Joint Stub End Length
  • SS Stub End Tolerances
  • DIN 2642 Stub End Dimensions
  • DIN 2642 PN10 Lapped Collar Dimensions
  • DIN 16963 Stub End Dimensions
  • JIS 10k Stub End Dimensions
  • What are the Different Types Of ASME B16.9 Stub End?

 

Which One Will Be Used In Stub In Joint?

Stub End Buttweld Fittings differ in type such as the Mss Type B Stub End; material makes such as the Stub End Carbon Steel and the Stub End 304 or the Stub End Stainless Steel. Also the Stub End Specification differs such as the Stub End Din 2642 or the Stub End EN 1092-1 Type 35 and the Stub End EN 1092-1 Type 36. As in any other pipe fitting, the pressure classes differ as well.  There are Stub End Jis 10k, the Stub End Sch 10 and the Stainless Steel Stub End which all have different properties. The ASME B 16.9 Stub End can be manufactured in many different materials yet the Ss Stub End Dimensions make stainless steel to be the most preferred choice. ANSI B 16.9 Stub End is used in low to medium level piping ranging from ½ inch to 48 inches.

 

Which Two Common Type Of Stub End?

The ASME B16.9 Stainless Steel Stub End Manufacturers produce type A and type B Stainless Steel Stub End Pipe Fittings. Depending on the length of the stub part of the fitting, it is divided into two categories; the Long Stub End and the Short Stub End. These serve different purposes in pipe fitting. A Lap Joint Stub End is used as a replacement to welded flanges when the rotation needs back up with another flange. The different material makes, the different Type B Stub End Dimensions and the different applications can make the different entries in a Stub End Weight Chart. In the two types, the Stub End Type A is most common. The standards vary such as the Stub End B16.9 which goes with pipes less than 48 inches in diameter.

 

ASME B16.9 Stub Ends Can Be Ordered With Different Ends Finishing:

  • Beveled Ends
  • Flanged Ends
  • Squared Ends
  • Threaded Ends (Male Only)
  • Grooved Ends

 

Standard Specification Of Carbon Steel Stub Ends, KOC Approved Buttweld Stub End Flange Manufacturer In India.

Lap Joint Stub End Specification

Specification: ASME B16.9 Stub End
Surface Coatings: Epoxy Coated, Black Painted, Varnished, Galvanized.
Type: Butt Weld (BW), Seamless (SMLS) Welded
Thickness: Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc.
Type Of Dimension: MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, JIS B2313
Standard NPT, EN, ISO, DIN, JIS
Type Stub End, Bend, Tee, Elbow, Reducer, Cap, Adapter, Wye, Cross,
Connection Type End Bell / Threaded/ Clamp End / Weld/ Flange/
Pressure-Temperature Class 1500LB, 2500LB, 150LB, 300LB, 600LB.
Schedule: Schedule 5 TO Schedule XXS.
Size: Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Materials: Hastalloy, Alloy Steel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel, Inconel, Monel.

 

 

Most Selling Types Of Mss Type A / Type B / Type C Stub End In India, We Provide Online Payment Options Of Long Collar Stub Ends.

Stainless Steel Stub End Dimensions

NPS O.D.
of barrel		 Length (F) Radius (R) Diameter (G)
Min. Maxi. Long
Pattern		 Short
Pattern
1/2″ 20.5 22.8 76 51 3 35
3/4″ 25.9 28.1 76 51 3 43
1″ 32.6 35.0 102 51 3 51
1 1/4″ 41.4 43.6 102 51 5 64
1 1/2″ 47.5 49.9 102 51 6 74
2″ 59.5 62.4 152 64 8 92
2 1/2″ 72.2 75.3 152 64 8 105
3″ 88.1 91.3 152 64 10 127
3 1/2″ 100.8 104.0 152 76 10 140
4″ 113.5 116.7 152 76 11 157
5″ 140.5 144.3 203 76 11 186
6″ 167.5 171.3 203 89 13 216
8″ 218.3 222.1 203 102 13 270
10″ 272.3 277.2 254 127 13 324
12″ 323.1 328.0 254 152 13 381
14″ 354.8 359.9 305 152 13 413
16″ 405.6 411.0 305 152 13 470
18″ 456.0 462.0 305 152 13 533
20″ 507.0 514.0 305 152 13 584
22″ 558.0 565.0 305 152 13 641
24″ 609.0 616.0 305 152 13 692

 

MSS Sp 43 Stub End Dimensions

Inch ND Millimeter Diameter of Lap Joint Radius of fillet Length F
 D G R R1 MSS SP 43 ASME B16.9
1/2 15 21,34 34,92 3,17 0,80 50,80 76,20
3/4 20 26,67 42,86 3,17 0,80 50,80 76,20
1 25 33,40 50,80 3,17 0,80 50,80 101,60
1 1/4 32 42,16 63,50 4,76 0,80 50,80 101,60
1 1/2 40 48,26 73,00 6,35 0,80 50,80 101,60
2 50 60,32 92,10 7,93 0,80 63,50 152,40
2 1/2 65 73,02 104,80 7,93 0,80 63,50 152,40
3 80 88,90 127,00 9,52 0,80 63,50 152,40
3 1/2 90 101,60 139,70 9,52 0,80 76,20 152,40
4 100 114,30 157,20 11,11 0,80 76,20 152,40
5 125 141,30 185,70 11,11 1,58 76,20 203,20
6 150 168,27 215,90 12,70 1,58 88,90 203,20
8 200 219,07 269,80 12,70 1,58 101,60 203,20
10 250 273,05 323,80 12,70 1,58 127,00 254,00
12 300 323,85 381,00 12,70 1,58 152,40 254,00
14 350 355,60 412,70 12,70 1,58 152,40 304,80
16 400 406,40 469,90 12,70 1,58 152,40 304,80
18 450 457,20 533,40 12,70 1,58 152,40 304,80
20 500 508,00 584,20 12,70 1,58 152,40 304,80
22 550 558,80 641,30 12,70 1,58 152,40 304,80
24 600 609,60 692,10 12,70 1,58 152,40 304,80
The lap thickness T shall not be less than nominal pipe wall thickness t

 

Lap Joint Flange Stub End Dimensions

 (NPS) O.D. at Bevel Long Pattern Short Pattern Radius of Fillet Diameter of Lap Joint
Maximum Minimum F F R G
1/2 22.8 20.5 76 51 3 35
3/4 28.1 25.9 76 51 3 43
1 35.0 32.6 102 51 3 51
1-1/4 43.6 41.4 102 51 5 64
1-1/2 49.9 47.5 102 51 6 73
2 62.4 59.5 152 64 8 92
2-1/2 75.3 72.2 152 64 8 105
3 91.3 88.1 152 64 10 127
3-1/2 104.0 100.8 152 76 10 140
4 116.7 113.5 152 76 11 157
5 144.3 140.5 203 76 11 186
6 171.3 167.5 203 89 13 216
8 222.1 218.3 203 102 13 270
10 277.2 272.3 254 127 13 324
12 328.0 323.1 254 152 13 381
14 359.5 354.8 305 152 13 413
16 411.0 405.6 305 152 13 470
18 462 456 305 152 13 533
20 514 507 305 152 13 584
22 565 558 305 152 13 641
24 616 609 305 152 13 692

 

Long Neck Stub End Dimensions

Product Normal Pipe Sizes (NPS) Diameter (G) Length (F), Short Outside Diameter (O.D.) Sch 160, Inside Diameter (I.D.) Sch 160, Lap Joint Thickness (t) Schedule 160, Thickness Of Wall (T) XX Strong Wall Approx. Weight XX Strong Wall, Inside Diameter (I.D.)
1 1/2″ Type “A 1.5 2.875 2 1.9 1.338 0.281 0.281 2.98 1.1
1 1/2″ Type “A” 1.5 2.875 4 1.9 0.15 0.15 1.49 1.5 0.2
1 1/4″ Type “A 1.25 2.5 2 1.66 1.16 0.25 0.25 2.52 0.896
1 1/4″ Types “A” 1.25 2.5 4 1.66 0.14 0.14 1.26 1.278 0.191
1″ Types “A 1 2 2 1.315 0.815 0.25 0.25 1.76 0.599
1″ Types “A” 1 2 4 1.315 0.133 0.133 0.88 0.957 0.179
1/2″ Types “A 0.5 1.375 2 0.84 0.464 0.187 0.188 0.68 0.252
1/2″ Types “A” 0.5 1.375 3 0.84 0.109 0.109 0.34 0.546 0.147
10″ Types “A 10 12.75 5 10.75 8.5 1.125 1.125 – –
10″ Types “A” 10 12.75 10 10.75 0.365 0.365 54 9.75 0.5
12″ Types “A 12 15 6 12.75 10.126 1.312 1.312 – –
12″ Types “A” 12 15 10 12.75 0.375 0.375 64.5 11.75 0.5
14″ Types “A” 14 16.25 12 14 0.375 0.375 84 13 0.5
16″ Types “A” 16 18.5 12 16 0.375 0.375 98 15 0.5
18″ Types “A” 18 21 12 18 0.375 0.375 136 17 0.5
2 1/2″ Types “A 2.5 4.125 2.5 2.875 2.125 0.375 0.375 8.8 1.771
2 1/2″ Types “A” 2.5 4.125 6 2.875 0.203 0.203 4.4 2.323 0.276
2″ Types “A 2 3.625 2.5 2.375 1.689 0.343 0.343 6.1 1.503
2″ Types “A” 2 3.625 6 2.375 0.154 0.154 3.05 1.939 0.218
20″ Types “A” 20 23 12 20 0.375 0.375 157 19 0.5
3 1/2″ Types “A 3.5 5.5 3 4 – – – 15.5 2.728
3 1/2″ Types “A” 3.5 5.5 6 4 0.226 0.226 7.75 3.364 0.318
3″ Types “A 3 5 2.5 3.5 2.624 0.438 0.438 9.8 2.3
3″ Types “A” 3 5 6 3.5 0.216 0.216 6.5 2.9 0.3
3/4″ Types “A 0.75 1.688 2 1.05 0.612 0.218 0.219 0.94 0.434
3/4″ Types “A” 0.75 1.688 3 1.05 0.113 0.113 0.47 0.742 0.154
4″ Types “A 4 6.188 3 4.5 3.438 0.531 0.531 19.3 3.152
4″ Types “A” 4 6.188 6 4.5 0.237 0.237 9.65 3.826 0.337
5″ Types “A 5 7.313 3 5.563 4.313 0.625 0.625 32.66 4.063
5″ Types “A” 5 7.313 8 5.563 0.258 0.258 16.33 4.813 0.375
6″ Types “A 6 8.5 3.5 6.625 5.187 0.718 0.719 45.26 4.897
6″ Types “A” 6 8.5 8 6.625 0.28 0.28 22.63 5.761 0.432
8″ Types “A 8 10.625 4 8.625 6.813 0.906 0.906 59.71 6.875
8″ Types “A” 8 10.625 8 8.625 0.322 0.322 34.12 7.625 0.5

 

Check Lap Joint Stub End Dimensions/ Long Neck Stub End Dimensions/ Short Pattern Stub End Dimensions.

Short Pattern Stub End Dimensions

Product (NPS) Normal Pipe Size Diameter (G) Length (J) Outside Diameter Sch 5S Approx. Weight Sch 5S, (I.D.) Sch 5S, Thickness Of Wall (T)
1 1/2″ Type “C” 1.5 2.875 2 1.9 0.29 1.77 0.065
1 1/4″ Type “C” 1.25 2.5 2 1.66 0.21 1.53 0.065
1″ Type “C” 1 2 2 1.315 0.19 1.185 0.065
1/2″ Type “C” 0.5 1.375 2 0.84 0.13 0.71 0.065
10″ Type “C” 10 12.75 5 10.75 7.48 10.482 0.134
12″ Type “C” 12 15 6 12.75 15 12.438 0.156
14″ Type “C” 14 16.25 6 14 19.2 13.688 0.156
16″ Type “C” 16 18.5 6 16 23.9 15.67 0.165
18″ Type “C” 18 21 6 18 28.5 17.67 0.165
2 1/2″ Type “C” 2.5 4.125 2.5 2.875 0.75 2.709 0.083
2″ Type “C” 2 3.625 2.5 2.375 0.44 2.245 0.065
20″ Type “C” 20 23 6 20 36.3 19.624 0.188
24″ Type “C” 24 27.25 6 24 56 23.564 0.218
3″ Type “C” 3 5 2.5 3.5 0.94 3.334 0.083
3/4″ Type “C” 0.75 1.688 2 1.05 0.14 0.92 0.065
4″ Type “C” 4 6.188 3 4.5 1.38 4.334 0.083
5″ Type “C” 5 7.313 3 5.563 2.06 5.345 0.109
6″ Type “C” 6 8.5 3.5 6.625 2.75 6.407 0.109
8″ Type “C” 8 10.625 4 8.625 3.88 8.407 0.109

 

Carbon Steel Stub End Weight Chart

Normal Pipe Sizes In
inches		 ASME B16.9 Stub Ends
Schedule
5S		 Schedule
10S		 Schedule
40S		 Schedule
80S
1/2 0.06 0.08 0.12 0.13
3/4 0.07 0.09 0.15 0.17
1 0.09 0.15 0.20 0.25
1 1/4 0.13 0.20 0.30 0.35
1 1/2 0.16 0.25 0.38 0.46
2 0.25 0.40 0.55 0.75
2 1/2 0.35 0.50 0.80 1.00
3 0.50 0.60 1.10 1.50
4 0.70 1.00 1.80 2.50
5 1.00 1.25 2.50 3.50
6 1.60 1.95 3.70 5.50
8 2.50 3.10 5.90 10.0
10 4.00 4.90 10.5 14.0
12 6.60 7.10 15.0 20.0
14 6.40 7.80 15.5 20.5
16 7.90 9.00 18.0 24.0
18 9.30 10.5 21.0 28.0
20 12.0 13.5 23.5 31.0
24 16.5 19.0 28.5 38.0

 

End Welding Bevels of Type A Stub End

NPS NB Outside Daimeter Thickness Schedule 10 Schedule 20 Schedule 30 Schedule 40 Schedule 80
1/2 15 NB 21.30 1.65 2.11 __ 2.41 2.77 3.73
3/4 20 NB 26.70 1.65 2.11 __ 2.41 2.87 3.91
1 25 NB 33.40 1.65 2.77 __ 2.90 3.38 4.55
1 1/4 32 NB 42.20 1.65 2.77 __ 2.97 3.56 4.85
1 1/2 40 NB 48.30 1.65 2.77 __ 3.18 3.68 5.08
2 50 NB 60.30 1.65 2.77 __ 3.18 3.91 5.54
2 1/2 65 NB 73.00 2.11 3.05 __ 4.78 5.16 7.01
3 80 NB 88.90 2.11 3.05 __ 4.78 5.49 7.62
3 1/2 90 NB 101.60 2.11 3.05 __ 4.78 5.74 8.08
4 100 NB 114.30 2.11 3.05 __ 4.78 6.02 8.56
5 125 NB 141.30 2.77 3.40 __ __ 6.55 9.53
6 150 NB 168.30 2.77 3.40 __ __ 7.11 10.97
8 200 NB 219.10 2.77 3.76 6.35 7.04 8.18 12.70
10 250 NB 273.00 3.40 4.19 6.35 7.80 9.27 15.09
12 300 NB 323.80 3.96 4.57 6.35 8.38 10.31 17.48
14 350 NB 355.60 3.96 6.35 7.92 9.53 11.13 19.05
16 400 NB 406.40 4.19 6.35 7.92 9.53 12.7 21.44
18 450 NB 457.00 4.19 6.35 7.92 11.13 14.27 23.83
20 500 NB 508.00 4.78 6.35 9.53 12.70 15.09 26.19
22 550 NB 559.00 4.78 6.35 9.53 12.70 __ 28.58
24 600 NB 610.00 5.54 6.35 9.53 14.27 17.48 30.96

 

Lap Joint Stub End Length

Nominal Pipe Sizes Sch. D t G F R. Maximum Kilogram / St.  
1/2 “ 10s 21.3 2.11 34.9 50.8 3.18 0.07 s
40s 2.77 0.09 s
3/4 “ 10s 26.7 2.11 42.9 50.8 3.18 0.10 s
40s 2.87 0.12 s
1 “ 10s 33.4 2.77 50.8 50.8 3.18 0.16 s / w
40s 3.38 0.17 s
1 1/4 “ 10s 42.2 2.77 63.5 50.8 4.76 0.22 s
40s 3.56 0.25 s
1 1/2 “ 10s 48.3 2.77 73.0 50.8 6.35 0.25 s / w
40s 3.68 0.31 s
2 “ 10s 60.3 2.77 92.1 63.5 7.94 0.43 s / w
40s 3.91 0.61 s
2 1/2 “ 10s 73.0 3.05 104.8 63.5 7.94 0.57 s / w
40s 5.16 0.80 s
3 “ 10s 88.9 3.05 127.0 63.5 9.53 0.73 s / w
40s 5.49 1.13 s
4 “ 10s 114.3 3.05 157.2 76.2 11.11 1.09 s / w
40s 6.02 1.87 s
5 “ 10s 141.3 3.40 185.7 76.2 11.11 1.47 s / w
40s 6.55 2.28 s
6 “ 10s 168.3 3.40 215.9 88.9 12.70 2.15 s / w
40s 7.11 3.57 s / w
8 “ 10s 219.1 3.76 269.9 101.6 12.70 3.22 s / w
40s 8.18 6.07 s / w
10 “ 10s 273.1 4.19 323.9 127.0 12.70 5.13 w
40s 9.27 10.07 w
12 “ 10s 323.9 4.57 381.0 152.4 12.70 8.16 w
40s 9.53 14.29 w
14 “ 10s 355.6 4.78 412.8 152.4 12.70 10.89 w
40s 9.53 17.15 w
16 “ 10s 406.4 4.78 469.9 152.4 12.70 12.70 w
40s 9.53 20.41 w
18 “ 10s 457.2 4.78 533.4 152.4 12.70 17.24 w
20 “ 10s 508.0 5.54 584.2 152.4 12.70 21.77 w
24 “ 10s 609.6 6.35 692.2 152.4 12.70 27.22 w

 

SS Stub End Tolerances

For all Buttweld Fittings Stub Ends
(NPS) Outside Daimeter Ø at Bevel Indide Daimeter Ø at End Thickness Of Wall
t / t1		 Outside Daimeter of Lap G Fillet Radius of Lap – R Overall Length. – F
1/2 a 2 1/2 1 0,8 Not +0 -1 +0 -1 2
3 a 3 1/2 1 1,6 less +0 -1 +0 -1 2
4 +2 -1 1,6 than +0 -1 +0 -2 2
5 a 6 +3 -1 1,6 87,50% +0 -1 +0 -2 2
8 2 1,6 of nominal +0 -1 +0 -2 2
10 +4 -3 3,2 tickness +0 -2 +0 -2 2
12 to 18 +4 -3 3,2 +0 -2 +0 -2 3
20 a 24 +6 -5 4,8 +0 -2 +0 -2 3
26 a 30 +7 -5 4,8
32 a 48 +7 -5 4,8

 

DIN 2642 Stub End Pressure Rating And One Stop Shop For All Stub End Buttweld Fittings Material In India.

DIN 2642 Stub End Dimensions

 

DIN 2642 Stub End
Pipe Bund
DN d1 d5 d4 h3 Kilogram
10 14.0 14,5 40,0 10,0 0,087
10 17.2 17,7 40,0 10,0 0,087
15 20.0 21,0 45,0 10,0 0,105
15 21.3 22,0 45,0 10,0 0,105
20 25.0 26,0 58,0 12,0 0,203
20 26.9 27,6 58,0 12,0 0,203
25 30.0 31,0 68,0 12,0 0,276
25 33.7 34,4 68,0 12,0 0,276
32 38.0 39.0 78,0 12,0 0,343
32 42.4 43,1 78,0 12,0 0,343
40 44.5 45,5 88,0 12,0 0,426
40 48.3 49,0 88,0 12,0 0,426
50 57.0 58,1 102,0 14,0 0,618
50 60.3 61,1 102,0 14,0 0,618
65 76.1 77,1 122,0 14,0 0,786
80 88.9 90,3 138,0 16,0 1,10
100 108.0 109,6 158,0 16,0 1,31
100 114.3 115,9 158,0 16,0 1,31
125 133.0 134,8 188,0 18,0 1,96
125 139.7 141,6 188,0 18,0 1,96
150 159.0 161,1 212,0 18,0 2,18
150 168.3 170,5 212,0 18,0 2,18
200 219.1 221,8 268,0 20,0 3,10
250 267.0 270,2 320,0 22,0 4,22
250 273.0 276,2 320,0 22,0 4,22
300 323.9 327,6 370,0 22,0 4,85
350 355.6 359,7 430,0 22,0 6,71
350 368.0 372,2 430,0 22,0 6,71
400 406.4 411,0 482,0 24,0 8,28
400 419.0 423,7 482,0 24,0 8,28
500 508.0 513,6 585,0 26,0 11,5
600 610.0 616,6 685,0 26,0 15,6
700 711.0 718,6 800,0 28,0 23,2
800 813.0 821,5 905,0 30,0 29,2

 

DIN 16963 Stub End Dimensions

 

JIS 10k Stub End Dimensions

 

NPS Outside Diameter (O.D.) Center to End (G) (F) (R) Thickness Of Wall (T) Weights In Kilogram
Schedule 5S Schedule 10S Schedule Std Schedule XS Schedule 5S Schedule 10S Schedule Std Schedule Xs
1/2 21.7 51 30 3 1.65 2.1 2.5 2.8 0.047 0.058 0.069 0.077
3/4 27.2 56 30 3 1.65 2.1 2.5 2.9 0.056 0.071 0.084 0.096
1 34.0 67 50 3 1.65 2.8 3.0 3.4 0.101 0.167 0.178 0.201
1-1/4 42.7 76 50 4 1.65 2.8 3.0 3.6 0.125 0.209 0.223 0.264
1-1/2 48.6 81 50 4 1.65 2.8 3.0 3.7 0.140 0.233 0.249 0.304
2 60.5 96 50 4 1.65 2.8 3.5 3.9 0.178 0.299 0.370 0.411
2-1/2 76.3 116 50 5 2.1 3.0 3.5 5.2 0.295 0.417 0.485 0.709
3 89.1 126 50 5 2.1 3.0 4.0 5.5 0.332 0.471 0.623 0.846
4 114.3 151 50 5 2.1 3.0 4.0 6.0 0.422 0.599 0.794 1.18
5 139.8 182 50 6 2.8 3.4 5.0 6.6 0.716 0.867 1.27 1.66
6 165.2 212 50 6 2.8 3.4 5.0 7.1 0.876 1.06 1.55 2.18
8 216.3 262 65 6 2.8 4.0 6.5 8.2 1.35 1.92 3.10 3.89
10 267.4 324 65 6 3.4 4.0 6.5 9.3 2.17 2.55 4.11 5.84
12 318.5 368 65 9 4.0 4.5 6.5 10.3 2.89 3.25 4.67 7.34
Normal Pipe Sizes (Outside Daimeter) (G) (F) (R) 10K schedule 10S schedule 20 Std. Xs
5.0 6.0 8.0 10.0
14 355.6 413 75 9 4.66 5.58 7.41 9.22
16 406.4 475 75 9 5.64 6.76 8.99 11.2
18 457.2 530 75 9 6.48 7.76 10.3 12.9
20 508.0 585 75 9 7.33 8.79 11.7 14.6
24 609.6 690 75 9 8.92 10.7 14.2 17.7
26 660.4 740 125 9 13.7 16.4 21.9 27.3
28 711.2 800 125 9 15.2 18.2 24.3 30.3
30 762.0 855 125 9 16.5 19.8 26.3 32.9
32 812.8 905 125 9 17.5 21.0 28.0 34.9
34 863.6 955 125 9 18.6 22.3 29.7 37.0
36 914.4 1005 125 9 19.6 23.5 31.3 39.1

 

What are the Different Types Of ASME B16.9 Stub End?

 

1 inch, Schedule 10, Stainless Steel Stub Ends

1/2 inch, SMLS, SCH 180, Carbon Steel Stub End

16 inch, Sch 10, ASME B16.9, Mss Type A Stub End

4 inch, Buttweld, Schedule 160, Stub End Pipe Fittings

2 Inch, Buttweld, B16.9, Carbon Steel En 1092 Stub Ends

6 Inch, SCH 40, ANSI B16.9, Stub End Lap Joint Flanges

3 Inch, Buttweld, Long Neck Stub Ends

8 Inch, SCH80, BW, ASME B16.9, Long Pattern Stub Ends

18 Inch, SMLS, Schedule 40, Stainless Steel Stub End

22 Inch, ASME B16.9, SCH20, Type A Collar Long Stub End

2-1/2 Inch, A403 WP304L, Seamless Short Pattern Stubs End

1 1/2 Inch, ASTM A403 WP316, SCH 10S, Type C Short Type Stub Ends

 

6 Inch, SMLS, SCH 180S, Stub End Short Pattern Type A

2 Inch, ASME B16.9, 140 mm, Carbon Steel Stub Ends

10 Inch, SCH 10S, MSS SP-43, Class 300, Stubs End Pipe Fittings

12 Inch, ANSI B16.9, SCH 10S, Stubs End EN 1092-1 Type 35

 

Category:

Description

Stub End Manufacturer in Italy 

Masiva Metal is a trusted Stub End manufacturer in Italy, offering high-quality pipe fittings in various materials, sizes and specifications for industrial piping applications. 

Stub End Manufacturer in Belgium 

Masiva Metal is a reliable Stub End manufacturer in Belgium, delivering precision-engineered fittings with durable construction, quality materials and dependable performance for industrial piping systems. 

Stub End Manufacturer in UAE 

Masiva Metal is a trusted Stub End manufacturer in UAE, offering precision-engineered pipe fittings with quality materials, durable construction and reliable performance for industrial piping requirements. 

Stub End Manufacturer in Spain 

Masiva Metal manufactures Stub Ends in Spain with precision engineering, quality materials, durable construction and reliable performance for diverse industrial piping and process applications. 

Stub End Manufacturer in Germany 

Masiva Metal is a trusted Stub End manufacturer in Germany, offering precision-fabricated pipe fittings with quality materials, accurate dimensions and reliable performance for industrial piping applications. 

Stub End Manufacturer in South Korea 

Masiva Metal is a reliable Stub End manufacturer in South Korea, providing precision-engineered pipe fittings with quality materials, durable construction and consistent performance for industrial applications. 

Stub End Manufacturer in Vietnam 

Masiva Metal manufactures Stub Ends in Vietnam, offering quality-engineered pipe fittings with precision dimensions, durable materials and reliable performance for industrial piping and engineering applications. 

Stub End Manufacturer in Philippines 

Masiva Metal is a trusted Stub End manufacturer in the Philippines, delivering quality pipe fittings with precision dimensions, durable construction and dependable performance for industrial piping systems. 

Stub End Manufacturer in Saudi Arabia 

Masiva Metal is a trusted Stub End manufacturer in Saudi Arabia, offering durable, precision-engineered pipe fittings with quality materials and reliable performance for industrial piping applications. 

Stub End Supplier in Italy 

Masiva Metal is a reliable Stub End supplier in Italy, providing quality industrial pipe fittings in multiple materials, sizes and specifications for demanding piping applications. 

Stub End Supplier in Belgium 

Masiva Metal supplies Stub Ends in Belgium with reliable quality, accurate dimensions, durable materials and suitable solutions for industrial, engineering and piping applications. 

Stub End Supplier in UAE 

Masiva Metal is a dependable Stub End supplier in UAE, providing quality fittings in different materials, sizes and specifications for industrial piping and engineering applications. 

Stub End Supplier in Spain 

Masiva Metal is a trusted Stub End supplier in Spain, supplying quality industrial fittings with accurate dimensions, durable materials and dependable solutions for piping systems. 

Stub End Supplier in Germany 

Masiva Metal supplies Stub Ends in Germany with dependable quality, precise dimensions, durable construction and suitable fitting solutions for industrial piping and process systems. 

Stub End Supplier in South Korea 

Masiva Metal supplies Stub Ends in South Korea, offering quality fittings with accurate dimensions, robust construction and dependable solutions for industrial piping requirements. 

Stub End Supplier in Vietnam 

Masiva Metal is a dependable Stub End supplier in Vietnam, providing quality industrial fittings in various materials, sizes and specifications for piping systems. 

Stub End Supplier in Philippines 

Masiva Metal supplies Stub Ends in the Philippines with reliable quality, accurate dimensions, durable materials and efficient solutions for industrial piping applications. 

Stub End Supplier in Saudi Arabia 

Masiva Metal is a reliable Stub End supplier in Saudi Arabia, providing quality industrial fittings with precise dimensions, durable construction and dependable piping solutions. 

Customer Reviews

No reviews yet.

Related products