ASME B16.9 Elbow

What Is 45 Degree Elbow?

45 Deg Elbow is a type of elbow used to connect two pipes to change the direction of fluid flow in the pipeline. The denotation of Deg is the abbreviation for degrees therefore the 45 Deg means an ASME B16.9 elbow 45 degree fitting. 45 Deg Elbow Dimensions vary according to the standards. There are diameters ranging from ½ inches all the way up to 60 inches in two standards. The 45 Deg Elbow Weight depends on the length, material make, diameter and the radius of the elbow.

ASME B16.9 45 Deg Elbow

Carbon Steel 45 Degree Elbow

45 Degree Copper Elbow

How To Find The Center Of A 45 Degree Elbow?
What Use Of Stainless Steel 45 Degree Elbow?
ASME B16.9 Elbow Dimensions
Carbon Steel 45 Degree Elbow Price List
MSS SP-75 45 Degree Elbow Weight Calculator
Stainless Steel 45 Degree Elbow Tolerances
ASME B16.9 Elbow 45 Degree Specification
45 Degree Elbow Fitting Standard Pattern
SCH 80 45 Degree Elbow Economic Pattern
45 Degree Elbow Cutting Formula
45 Degree Elbow Take Off Formula
Different Types Of ASME B16.9 45 Deg Elbow

How To Find The Center Of A 45 Degree Elbow?

45 deg elbows center formula to end dimension for 2 inch nps diameter elbow at 30 deg angle, cut from 45 deg long radius elbow

From ASME B16.9, center to elbow dimension for 2 inch asme b16.9 45 deg elbow is 35 millimeter.

Radius of elbow = 35/Tan(22.5)
Radius of elbow = 35/0.4142 = 84.5 millimeter
Length = 0.26795 X 84.5
Length = 22.64 i.e. 23 millimeter Approx.

What Use Of Stainless Steel 45 Degree Elbow?

45 Degree Compression Elbow is another type of elbow used to connect two pieces of pipes with change of direction at a 45 degree angle. ASME B16.9 Elbow 45 Deg is a range that complies from NPS1/2 to NPS24. SCH 80 45 Degree Elbow belongs to the schedule 80 category where the Elbow 45 Sch 10 belongs to the schedule 10 and the Elbow 45 Sch 40 belongs to schedule 40.

The 45 Deg Elbow Short Radius has a short radius so that the elbow is smaller compared to a 45 Deg Elbow Lr which has a long radius. The 45 Deg Elbow Long Radius is difficult to fit in narrow lines compared to the 45 Deg Short Radius Elbow. Carbon Steel 45 Degree Elbow Fitting can be worked under cold conditions but is usually supplier in a normalized and tempered condition. 45 Degree Pipe Elbow takes a less aggressive turn than a 90 degree elbow and thus the 45 Deg Street Elbow would reduce the stress caused by the directional change onto the pipe.

SCH 80 45 Degree Elbow has high yield strengths compared to other schedules and the Buttweld Elbow 45 Degree is also stronger because of the manufacturing process involved. Elbow 45 Degree can be of different materials such as the Stainless Steel 45 Degree Elbow depending on the strength and other mechanical property requirements. A 45 Degree Mitered Elbow could either have one perpendicular joints or three dimensional joints. There are different pressure classes such as DIN 2605 45 Deg Elbow Type 3 to choose according to the pressure containment requirements as well.

ASME B16.9 Elbow Dimensions

Normal Pipe Size	Outside Daimeter D	90 Deg Long Radius Center-to-End A	45 Deg Long Radius Center-to-End B	90 Deg 3D Center-to-End A	45 Deg 3D Center-to-End B
1/2	21.3	38	16	–	–
3/4	26.7	38	19	57	24
1	33.4	38	22	76	31
1¼	42.2	48	25	95	39
1½	48.3	57	29	114	47
2	60.3	76	35	152	63
2½	73	95	44	190	79
3	88.9	114	51	229	95
3½	101.6	133	57	267	111
4	114.3	152	64	305	127
5	141.3	190	79	381	157
6	168.3	229	95	457	189
8	219.1	305	127	610	252
10	273	381	159	762	316
12	323.8	457	190	914	378
14	355.6	533	222	1067	441
16	406.4	610	254	1219	505
18	457	686	286	1372	568
20	508	762	318	1524	632
22	559	838	343	1676	694
24	610	914	381	1829	757
26	660	991	406	1981	821
28	711	1067	438	2134	883
30	762	1143	470	2286	964
32	813	1219	502	2438	1010
34	864	1295	533	2591	1073
36	914	1372	565	2743	1135
38	965	1448	600	2896	1200
40	1016	1524	632	3048	1264
42	1067	1600	660	3200	1326
44	1118	1676	695	3353	1389
46	1168	1753	727	3505	1453
48	1219	1829	759	3658	1516

Carbon Steel 45 Degree Elbow Fitting Price List

Type Of Elbow	Size	Price In India
45 Deg	STD 1/2"	162.41
45 Deg	STD 3/4"	117.29
45 Deg	STD 1"	152.41
45 Deg	STD 11/4"	189.48
45 Deg	STD 11/2"	216.54
45 Deg	STD 2"	279.70
45 Deg	STD 21/2"	514.29
45 Deg	STD 3"	721.81
45 Deg	STD 4"	1415.66
45 Deg	STD 5"	2345.89
45 Deg	STD 6"	3789.52
45 Deg	STD 8"	6947.45

Buy Now

Please note this is an approx Price of 45 degree elbow in India. For final 45 deg elbow Price Please Call on 91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

IBR approved schedule 80 Stainless Steel 45 Degree Elbow Manufacturer In India Or BS1640 45 Degree Elbows Weight Calculation.

MSS SP-75 45 Degree Elbow Weight Calculator

Normal Pipe Size	LBS	Weight In Kilogram
1/2	0.09	0.04
3/4	0.09	0.04
1	0.25	0.11
1.1/4	0.38	0.17
1.1/2	0.4	0.18
2	0.81	0.37
2.1/2	1.75	0.79
3	2.63	1.19
3.1/2	3.5	1.59
4	4.5	2.04
5	7.5	3.4
6	12	5.44
8	23	10.43
10	43	19.5
12	62	28.12
14	80	36.29
16	100	45.36
18	126	57.15
20	160	72.57
22	197	89.36
24	238	107.95
26	275	124.74
30	367	166.47
36	531	240.86
NPS	LBS	KG

Stainless Steel 45 Degree Elbow Tolerances

45 Deg Elbow Tolerances
For all fittings				90/45 deg Elbows	180 deg Returns
(NPS)	O.D. at Bevel	I.D. at End	Thickness Of Wall t / t1	Center to End Diameter A-B-C-M	Center to Center Diameter O	Back to Face Dim. K	Align- ment of Ends U
1/2 a 2 1/2	1	0,8	Not	2	7	7	1
3 a 3 1/2	1	1,6	less	2	7	7	1
4	+2 -1	1,6	than	2	7	7	1
5 a 6	+3 -1	1,6	87,50%	2	7	7	1
8	2	1,6	of nominal	2	7	7	1
10	+4 -3	3,2	tickness	2	7	7	2
12 a 18	+4 -3	3,2		3	10	7	2
20 a 24	+6 -5	4,8		3	10	7	2
26 a 30	+7 -5	4,8		3	…..	…..	…..
32 a 48	+7 -5	4,8		5	…..	…..	…..

Popular Types of Buttweld Elbows 45 Deg We Supply, ASME B16.9 45 Deg Elbow Manufacturer In India.

45 Degree Elbow Fitting Standard Pattern

Size	1/8"		1/4"		3/8"		1/2"		3/4"		1"		1-1/4"		1-1/2"		2"		2-1/2"		3"		4"
Size	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in	millimeter	in
A	15	0.59	16	0.63	18	0.71	20	0.79	24	0.94	27	1.06	31	1.22	34	1.34	39	1.54	46	1.81	52	2.05	63	2.48
B	16	0.63	18.4	0.72	22	0.87	29	1.14	31.6	1.24	42	1.65	48.4	1.91	57	2.24	70	2.76	88	3.46	101	3.98	127.6	5.02

SCH 80 45 Degree Elbow Economic Pattern

SIZE	1/8"		1/4"		3/8"		1/2"		3/4"		1"		1-1/4"		1-1/2"		2"		2-1/2"(NPT)		2-1/2"(PS)		3"		4"
SIZE	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches	mm	inches
A	15	0.59	16	0.63	18	0.71	20	0.79	24	0.94	27	1.06	31	1.22	34	1.34	39	1.54	46	1.81	46	1.81	52	2.05	63	2.48
B	13.9	0.55	17.4	0.69	20.9	0.82	24.9	0.98	31.2	1.23	38.1	1.5	47.4	1.87	54.1	2.13	66.6	2.62	80.1	3.15	82.4	3.24	95.9	3.78	121.8	4.8

Buy Stainless Steel 45 Degree Street Elbow At Best Price And Fast Delivery / 15mm 45 Degree Mitered Elbow Specification.

ASME B16.9 Elbow 45 Degree Specification

Specification:	ASME B16.9 45 Deg Elbow
Type:	Butt Weld (BW), Seamless (SMLS) Welded
Thickness:	Sch 5S, 20S, S10, S20, S30, 10S, S80, S100, S120, STD, 40S, S40, S60, XS, 80S, S140, S160, XXS and etc.
Schedule:	Schedule 5 TO Schedule XXS.
Size:	Normal Pipe Size (NPS) 1⁄₂ to Normal Pipe Size (NPS) 48”
Standard	EN, ISO, DIN, JIS, NPT
Type	Elbow, Stub End, Bend, Tee, Reducer, Cap, Adapter, Wye, Cross,
Connection Type	Threaded/ Clamp End / End Bell / Weld/ Flange/
Pressure-Temperature Class	150LB, 300LB, 600LB, 1500LB, 2500LB.
Materials:	Inconel, Monel, Hastalloy, Alloy Steel, Brass, Bronze, Copper, Iron (Ductile/Cast), Carbon Steel, Titanium, Chrome-molybdenum, Nickel Alloys, Tantalum, Stainless Steel, Cupro-Nickel 90/10 & 70/30, Nickel.
Type Of Dimension:	BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

45 Degree Elbow Cutting Formula

R1= elbow radius marking 1
R2= elbow radius marking 2
R3= elbow radius marking 3

EC = Elbow Center

OD = Outside Daimeter

R2 = Both Side Radius Marking

Formula:

(R1) - tan x 1 x (EC - 1/2 OD) x Deg = answar
(R2) - tan x 1 x EC ... x Deg = answar
(R3) - tan x 1 (EC + 1/2 OD) x deg = answar

45 Degree Elbow Take Off Formula

Tan 22.5= T.O / 1.5D
O (Inches)= 0.621 D
O (Millimeter)= 15.77 D

Well-known 1 Inch 45 Degree Sweep Elbows Supplier In Mumbai, India, Buy Din 2605 Type 3 45° Elbow Seamless and Welded Connection.

Different Types Of ASME B16.9 45 Deg Elbow

3 Inch, Ductile Iron, 45 degree pipe elbows

4 Inch, Butt Weld, Sch 40, 45 degree elbows

3 Inch, LR, Buttweld, Sch 20, 45 degree elbows

5 Inch, SMLS, Schedule 80, ASME B16.9 elbow 45 degree

1 in. Schedule 40 Carbon Steel 45 Degree Elbow Fitting

4 Inch, Sch 10, ASTM A403 WP321, Carbon Steel 45 Degree Elbow Fitting

26 Inch, LR, Sch 180, Stainless Steel 45 Deg Street Elbows

12 Inch, SCH 100, A403 WP316, 45 Deg Short Radius Elbows

15mm Din 2605, 45 Degree Compression Elbows

DN 15 to DN 1,400mm, ASME B16.9 Elbow 45 Deg

SCH160 Pressure, Long Radius SCH 80 45 Degree Elbows

SCH. 80, 6 Inch,ANSI B 16.9, Stainless Steel 45 Degree Elbows

ASTM A536, 100MM Schedule 10, Short Radius Elbow 45

Sch. XS, 10 inch, Buttweld Elbow 45 Degrees

OD70mm x WT2mm, Sch 120, 45 Degree Mitered Elbows

Butt Welded, 10 Inch, SCH 80, Stainless Steel 45 Degree Elbows

Category: Buttweld Fittings

Description
Reviews (0)

Description

ASME B16.9 Elbow Manufacturer in Italy

Masiva Metal is a trusted ASME B16.9 Elbow manufacturer in Italy, offering high-quality butt weld elbows in various materials, sizes and specifications for industrial piping applications.

ASME B16.9 Elbow Manufacturer in Belgium

Masiva Metal is a reliable ASME B16.9 Elbow manufacturer in Belgium, delivering precision-engineered elbows with durable construction, quality materials and dependable performance for industrial piping systems.

ASME B16.9 Elbow Manufacturer in UAE

Masiva Metal is a trusted ASME B16.9 Elbow manufacturer in UAE, offering precision-engineered butt weld elbows with quality materials, durable construction and reliable performance for industrial piping requirements.

ASME B16.9 Elbow Manufacturer in Spain

Masiva Metal manufactures ASME B16.9 Elbows in Spain with precision engineering, quality materials, durable construction and reliable performance for diverse industrial piping and process applications.

ASME B16.9 Elbow Manufacturer in Germany

Masiva Metal is a trusted ASME B16.9 Elbow manufacturer in Germany, offering precision-fabricated elbows with quality materials, accurate dimensions and reliable performance for industrial piping applications.

ASME B16.9 Elbow Manufacturer in South Korea

Masiva Metal is a reliable ASME B16.9 Elbow manufacturer in South Korea, providing precision-engineered elbows with quality materials, durable construction and consistent performance for industrial applications.

ASME B16.9 Elbow Manufacturer in Vietnam

Masiva Metal manufactures ASME B16.9 Elbows in Vietnam, offering quality-engineered fittings with precision dimensions, durable materials and reliable performance for industrial piping and engineering applications.

ASME B16.9 Elbow Manufacturer in Philippines

Masiva Metal is a trusted ASME B16.9 Elbow manufacturer in the Philippines, delivering quality fittings with precision dimensions, durable construction and dependable performance for industrial piping systems.

ASME B16.9 Elbow Manufacturer in Saudi Arabia

Masiva Metal is a trusted ASME B16.9 Elbow manufacturer in Saudi Arabia, offering durable, precision-engineered elbows with quality materials and reliable performance for industrial piping applications.

ASME B16.9 Elbow Supplier in Italy

Masiva Metal is a reliable ASME B16.9 Elbow supplier in Italy, providing quality industrial elbows in multiple materials, sizes and specifications for demanding piping applications.

ASME B16.9 Elbow Supplier in Belgium

Masiva Metal supplies ASME B16.9 Elbows in Belgium with reliable quality, accurate dimensions, durable materials and suitable solutions for industrial, engineering and piping applications.

ASME B16.9 Elbow Supplier in UAE

Masiva Metal is a dependable ASME B16.9 Elbow supplier in UAE, providing quality elbows in different materials, sizes and specifications for industrial piping and engineering applications.

ASME B16.9 Elbow Supplier in Spain

Masiva Metal is a trusted ASME B16.9 Elbow supplier in Spain, supplying quality industrial elbows with accurate dimensions, durable materials and dependable solutions for piping systems.

ASME B16.9 Elbow Supplier in Germany

Masiva Metal supplies ASME B16.9 Elbows in Germany with dependable quality, precise dimensions, durable construction and suitable fitting solutions for industrial piping and process systems.

ASME B16.9 Elbow Supplier in South Korea

Masiva Metal supplies ASME B16.9 Elbows in South Korea, offering quality fittings with accurate dimensions, robust construction and dependable solutions for industrial piping requirements.

ASME B16.9 Elbow Supplier in Vietnam

Masiva Metal is a dependable ASME B16.9 Elbow supplier in Vietnam, providing quality industrial elbows in various materials, sizes and specifications for piping systems.

ASME B16.9 Elbow Supplier in Philippines

Masiva Metal supplies ASME B16.9 Elbows in the Philippines with reliable quality, accurate dimensions, durable materials and efficient solutions for industrial piping applications.

ASME B16.9 Elbow Supplier in Saudi Arabia

Masiva Metal is a reliable ASME B16.9 Elbow supplier in Saudi Arabia, providing quality industrial elbows with precise dimensions, durable construction and dependable piping solutions.

Customer Reviews

No reviews yet.