Stainless Steel Socket Weld Tee
Category: Socket Weld Fittings

Stainless Steel Socket Weld Tee

Check ANSI B16.11 Class 3000/ 6000# Socket Weld Tee Dimensions And Weight Chart.

What Is Socket Weld Tee?

 

Stainless Steel Socket Weld Tee is a type of pipe fitting that is used to connect three pipes of either same size or different sizes; and it has socket weld at the edges of the openings. The Asme B16.11 Socket Weld Tee is governed by Socket Weld Tee Dimensions ranging from ½ inches to 4 inches in diameter. The Asme B16.11 Socket Weld Tee Fittings have socket at the edges where there pipe could be inserted and welded for optimum grip. These Tee Ansi B16.11 fittings are used with smaller size pipes. The use of Tee B16.11 is very common in low cost applications. But the Asme B16.11 Sw Tee could also be used in high pressure and high cost systems depending on the requirements.

Stainless Steel Socket Weld Tee

ASME B16.11 Socket Weld Tee

Carbon Steel Socket Weld Tee

 

Table of contents

  • 6000# SW Tee Joining Connection Pipeline?
  • Use Of Stainless Steel Socket Weld Tee Water Purification Piping?
  • Socket Weld Tee Dimensions
  • Class 3000 SW Tee Dimensions
  • Class 6000 Tee SW Dimensions
  • Carbon Steel Socket Weld Tee Specification Format
  • Forged Socket Weld Tee Size Chart
  • ASME/ANSI B16.11 Forged Socket Weld Tee Weight Chart
  • Forged Socket Weld Tee Pressure Rating
  • Tolerance Chart Of ASME B16.11 SW Tee
  • Various Types of ASME B16.11 Socket Weld Tee

6000# SW Tee Joining Connection Pipeline?

 

There are specific types with an angled connection such as the Stainless Steel Socket Weld Tee which has the joining connection tilted in a 45 degree angle to the straight pipe line. The Forged Socket Weld Tee is strong and it could be used in high strength systems where the joining needs to be in an angle. Also the Socket Weld Tees have longer curvature radius that they can smooth up the directional change. In places where the space is not sufficient, the Carbon Steel Socket Weld Tee is useful because of its reduced length.

 

Use Of Stainless Steel Socket Weld Tee Water Purification Piping?

 

The Ansi B16.11 Stainless Steel Socket Weld Tee is used to cover the nominal sizes up to NPS 45 so that they have a wide range of uses. The socket welded Asme B16.9 Socket Weld Tee could be used in different applications such as the water pipe linings, gas and oil, desalination projects, water purification piping and more. Also, the pressure requirements can be covered by different pressure classes such as the Tee 3000lb Socket Weld for example, having a 3000lb pressure mark.

 

 

Refer ASME B16.11 SW Tee Material Specification, Socket Weld Tee Fittings Manufacturer In India.

Socket Weld Tee Dimensions

 

Class 3000 SW Tee Dimensions

Normal Pipe Sizes Socket Bore Socket Depth Bore Daimeter
B J D
1/2 21.95
21.70		 10 16.6
15
3/4 27.30
27.05		 13 21.7
20.2
1 34.05
33.80		 13 27.4
25.9
1.1/4 42.80
42.55		 13 35.8
34.3
1.1/2 48.90
48.65		 13 41.7
40.1
2 61.35
61.10		 16 53.5
51.7
2.1/2 74.20
73.80		 16 64.2
61.2
3 90.15
89.80		 16 79.5
46.4
4 115.80
115.45		 19 103.8
100.7
Normal Pipe Sizes Socket
Weight		 Body
Weight		 Socket Center to bottom
C G A
1/2 4.65
4.10		 3.75 15.5
3/4 4.90
4.25		 3.90 19.5
1 5.70
5.00		 4.55 22
1.1/4 6.05
5.30		 4.85 27
1.1/2 6.35
5.55		 5.10 32
2 6.95
6.05		 5.55 38
2.1/2 8.75
7.65		 7.00 41.5
3 9.50
8.30		 7.60 57.5
4 10.70
9.35		 8.55 66.5

 

Class 6000 Tee SW Dimensions

Normal Pipe Sizes Socket Bore Socket Depth Bore Daimeter
B J D
1/2 21.95
21.70		 10 12.5
11
3/4 27.30
27.05		 13 16.3
14.8
1 34.05
33.80		 13 21.5
19.9
1.1/4 42.80
42.55		 13 30.2
28.7
1.1/2 48.90
48.65		 13 34.7
33.2
2 61.35
61.10		 16 43.6
42.1
1/2 5.95
5.20		 4.80 19.5
3/4 6.95
6.05		 5.55 22.5
1 7.90
6.95		 6.35 27
1.1/4 7.90
6.95		 6.35 32
1.1/2 8.90
7.80		 7.15 38
2 10.90
9.50		 8.75 41

 

PDO Approved Forged Carbon Steel Socket Weld Tee Manufacturer In India Offer Fastest Delivery.

Carbon Steel Socket Weld Tee Specification Format

Specification : ASME B16.11 Socket Weld Tee
MSS SP-95 : Bull Plugs & Swage(d) Nipples
Threaded : No Threaded
Material : Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron, Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel.
Tolerance : 0.06 inches (1.6 millimeter)
Standards MSS SP 79, JIS B2302, ASME B16.11, Bs3799,MSS SP 95, MSS SP 83
Size Socket Weld Fittings = ½” – 8”
Pressure Rating : Socket Weld Fittings = 2000LB, 3000LB, 6000LB
Types : Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow.
Minimum Wall Thickness: 12.5%, minimum wall thickness
Finishing: Carbon Steel : Gavlvanized Or Black
Stainless Steel : Pickled
Schedule 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS.

 

View Price List Of ANSI B16.11 Forged Socket Weld Tee And Get a Live Quote Now For Class 9000 SW Tees.

 

Forged Socket Weld Tee Size Chart

 

ASME/ANSI B16.11 Forged Socket Weld Tee Weight Chart

NPS Appro. Weight In Kilogram
DN Normal Pipe Size Class 3000 Class 6000 Class 9000
6 1/8 0.13 0.22
8 1/4 0.13 0.22
10 3/8 0.16 0.45
15 1/2 0.35 0.55 1.15
20 3/4 0.4 0.9 1.8
25 1 0.66 1.46 2.25
32 1 1/4 1 1.9 3.95
40 1 1/2 1.4 3.4 4.87
50 2 2.2 3.7 8.89
65 2 1/2 4 7.2
80 3 6.15 10.7
100 4 14.3

 

Looking To Buy JIS B 2316 SS Socket Weld Tee? Contact Rajtilak Metal, A Reliable Socket Weld Tee Supplier in India.

 

Forged Socket Weld Tee Pressure Rating

 

Tolerance Chart Of ASME B16.11 SW Tee

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Socket Center To Bottom For Size
1/8" And 1/4"		 ± 0.03"
3/8", 1/2" And 3/4" ± 0.06"
1", 1-1/4", 1-1/2" And 2" ± 0.08"
2-1/2", 3", And 4" ± 0.10"
"B" - Socket Bore Diameter For Size
1-1/2" And Smaller		 + 0.020"
- 0.000"
2", 2-1/2", 3" And 4" + 0.025"
- 0.000"
"C" - Socket Wall Thick. Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting For Size
2" And Smaller		 ± 0.030"
2-1/2", 3" And 4" ± 0.060"
"E" - Sockets- Bottom To Bottom - Full Couplings For Size
1/8" And 1/4"		 ± 0.06"
3/8", 1/2" And 3/4" ± 0.12"
1", 1-1/4", 1-1/2" And 2" ± 0.16"
2-1/2", 3", And 4" ± 0.20"
"F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half Couplings For Size
1/8" And 1/4"		 ± 0.03"
3/8", 1/2" And 3/4" ± 0.06"
1", 1-1/4", 1-1/2" And 2" ± 0.08"
2-1/2", 3", And 4" ± 0.10"
"G" - Gap Of Welding Approx. 0.06"
Before Welding Recommended Gap
"H" - Min. Flat Min. Flat = 0.75 X Min.
Socket Wall Thick.

 

Various Types of ASME B16.11 Socket Weld Tee

2 X 1/2 Inch, CL3000, ASTM A182, SS Socket Weld Tee

2 × 2 Inch, ASTM A105N, 2000 LB, ASME B16.11 Tee

1x3/4 Inch, 3000#, ASME B16.11 Socket Weld Tee Fittings

1 1/2 X 1 Inch, ANSI B16.11, Bs3799, 6000# Sw Tee

 

1/2 Inch, 6000 LB, ASTM A105, Forged Socket Weld Tee 45 Degree

1 1/2 Inch, A351, Class 150 LB, Stainless Steel Socket Weld 45 Deg Tee

DN25, 3000#, ASME B16.11, Socket Weld Long Radius 45 Degree Tees

1 x 1 x 1/2 inch ANSI B16.11 45 Deg Forged Socket Weld Tee

 

2×2 Inch, 2000 LB, ASTM A105, ANSI B16.11 45 Deg Forged Socket Weld Tee

2 Inch, ASME B16.11, Class 3000 SW Tees

3 Inch, ASTM A105, 3000 LB, Carbon Steel SW Tees

2×3 Inch, A182, 3000LB, Class 6000 SW Tees

 

Category:

Description

Stainless Steel Socket Weld Tee Manufacturer in Italy 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee manufacturer in Italy, offering precision-engineered fittings with durable construction and reliable industrial performance. 

Stainless Steel Socket Weld Tee Manufacturer in Belgium 

Masiva Metal manufactures Stainless Steel Socket Weld Tees in Belgium with quality materials, precise engineering, durable construction and dependable piping performance. 

Stainless Steel Socket Weld Tee Manufacturer in UAE 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee manufacturer in UAE, delivering precision-engineered fittings with durable materials and consistent performance. 

Stainless Steel Socket Weld Tee Manufacturer in Spain 

Masiva Metal manufactures Stainless Steel Socket Weld Tees in Spain, offering precision-fabricated fittings with quality materials, accurate dimensions and reliable performance. 

Stainless Steel Socket Weld Tee Manufacturer in Germany 

Masiva Metal is a reliable Stainless Steel Socket Weld Tee manufacturer in Germany, offering precision-engineered fittings with durable construction and accurate dimensions. 

Stainless Steel Socket Weld Tee Manufacturer in South Korea 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee manufacturer in South Korea, providing quality-engineered fittings with durable construction and reliable industrial performance. 

Stainless Steel Socket Weld Tee Manufacturer in Vietnam 

Masiva Metal manufactures Stainless Steel Socket Weld Tees in Vietnam, offering quality fittings with precision dimensions, durable materials and dependable industrial performance. 

Stainless Steel Socket Weld Tee Manufacturer in Philippines 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee manufacturer in the Philippines, delivering precision-engineered fittings with durable construction and reliable performance. 

Stainless Steel Socket Weld Tee Manufacturer in Saudi Arabia 

Masiva Metal is a reliable Stainless Steel Socket Weld Tee manufacturer in Saudi Arabia, offering durable, precision-engineered fittings for demanding industrial piping applications. 

Stainless Steel Socket Weld Tee Supplier in Italy 

Masiva Metal is a reliable Stainless Steel Socket Weld Tee supplier in Italy, providing quality fittings with accurate dimensions for industrial piping systems. 

Stainless Steel Socket Weld Tee Supplier in Belgium 

Masiva Metal supplies Stainless Steel Socket Weld Tees in Belgium with precise dimensions, quality construction and reliable solutions for industrial piping applications. 

Stainless Steel Socket Weld Tee Supplier in UAE 

Masiva Metal is a dependable Stainless Steel Socket Weld Tee supplier in UAE, offering quality fittings in various sizes and specifications for piping systems. 

Stainless Steel Socket Weld Tee Supplier in Spain 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee supplier in Spain, providing durable fittings and dependable solutions for industrial piping requirements. 

Stainless Steel Socket Weld Tee Supplier in Germany 

Masiva Metal supplies Stainless Steel Socket Weld Tees in Germany with quality materials, precise engineering and dependable industrial piping solutions. 

Stainless Steel Socket Weld Tee Supplier in South Korea 

Masiva Metal supplies Stainless Steel Socket Weld Tees in South Korea with accurate dimensions, robust construction and reliable solutions for piping applications. 

Stainless Steel Socket Weld Tee Supplier in Vietnam 

Masiva Metal is a dependable Stainless Steel Socket Weld Tee supplier in Vietnam, providing quality fittings in multiple sizes and specifications for piping systems. 

Stainless Steel Socket Weld Tee Supplier in Philippines 

Masiva Metal supplies Stainless Steel Socket Weld Tees in the Philippines with quality materials, accurate dimensions and dependable industrial piping solutions. 

Stainless Steel Socket Weld Tee Supplier in Saudi Arabia 

Masiva Metal is a trusted Stainless Steel Socket Weld Tee supplier in Saudi Arabia, providing quality fittings with precise dimensions and dependable piping performance. 

Customer Reviews

No reviews yet.

Related products