Socket Weld Cross
Category: Socket Weld Fittings

Socket Weld Cross

What Is Socket Weld Cross?

 

Stainless Steel Socket Weld Cross is a type of socket weld fitting. It has four openings and looks like a cross with four sockets at each opening. The socket welds are usually used on smaller size pipes such as the Asme B16.11 Cross which is up to 4 inches in diameter. Socket Weld Cross vary according to the length of the arm and the size of the piping. Socket Weld Cross Tee can connect four equal sized pipes or different sized pipes. The Socket Weld Cross Section is designed to hold the various sizes of the pipes it has to be attached to. A B16.11 Socket Weld Cross can be applied in domestic and low cost pipe systems.

Socket Weld Cross

Stainless Steel Socket Weld Cross

Forged SW Equal Cross

 

Table of contents

  • Stainless Steel Socket Weld Cross Use In Power Generation?
  • ASME B16.11 SW Equal Cross Specification Chart
  • Socket Weld Cross Dimensions
  • Class 3000 Socket Weld Cross Dimensions In Inches
  • Class 6000 Socket Weld Cross Dimensions In MM
  • Socket Weld Cross Fitting Size Chart According to ASME B16.11
  • Carbon Steel Socket Weld Cross Temperature Ratings Table
  • Tolerance Chart Of Forged Socket Weld Equal Cross
  • Types Of ASME B16.11 SW Cross For Sale In India

Stainless Steel Socket Weld Cross Use In Power Generation?

 

Stainless steel is the most used material for the ASME B16.11 Stainless Steel Socket Weld Cross, but there are other materials used to produce it for specific requirements. The Ss 310 Socket Weld Cross is also used with the equal grade piping to make sure the overall strength of the system is maintained. Ansi B16.11 Forged Socket Weld Cross is used in water lines, gas lines and other smaller applications where the damage or problems won’t cost much. The Asme B16.11 Socket Weld Cross also has its variations in higher sizes with different standards. They can be used with higher pressures as well. The Forged Equal Cross 3000lb Socket Weld is such fitting that can withstand higher pressures up to 3000lb.

 

KOC Approved Forged Socket Weld Cross Manufacturer In Mumbai, India.

 

The Socket Weld Cross Fitting is not preferred in high pressure systems because it is unstable under pressure. It is also expensive than having two tee fittings. So the usage is only with specific conditions where other fittings cannot be applied. Since the stability is low, to prevent damages, the Forged Socket Weld Equal Cross is distributed in forged conditions. The forged Socket Weld Forged Equal Cross is stronger and can withstand higher pressures and temperatures. It is also made in different materials like the Stainless Steel Socket Weld Cross

 

ASME B16.11 SW Equal Cross Specification Chart

Specification : ASME B16.11 Socket Weld Cross
Threaded : No Threaded
Material : Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron.
ASME B16.11 Tolerance : 0.06 inches (1.6 millimeter)
Minimum Wall Thickness: 12.5%, minimum wall thickness
Finishing: Carbon Steel : Gavlvanized Or Black
Stainless Steel : Pickled
Standards ASME B16.11, Bs3799, MSS SP 79, JIS B2302, MSS SP 95, MSS SP 83
Size Socket Weld Fittings = ½” – 8”
Pressure Rating : Socket Weld Fittings = 2000LB, 3000LB, 6000LB
Types : Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow.
MSS SP-95 : Bull Plugs & Swage(d) Nipples
Schedule 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS.

 

Refer ASME B16.11 Forged Socket Weld Cross Weight Chart According to ANSI B16.11.

Socket Weld Cross Dimensions

 

Class 3000 Socket Weld Cross Dimensions In Inches

Normal Pipe Sizes Socket Bore Socket Depth Bore Diameter
B J D
1/2 21.95
21.70		 10 16.6
15
3/4 27.30
27.05		 13 21.7
20.2
1 34.05
33.80		 13 27.4
25.9
1.1/4 42.80
42.55		 13 35.8
34.3
1.1/2 48.90
48.65		 13 41.7
40.1
2 61.35
61.10		 16 53.5
51.7
2.1/2 74.20
73.80		 16 64.2
61.2
3 90.15
89.80		 16 79.5
46.4
4 115.80
115.45		 19 103.8
100.7
1/2 4.65
4.10		 3.75 15.5
3/4 4.90
4.25		 3.90 19.5
1 5.70
5.00		 4.55 22
1.1/4 6.05
5.30		 4.85 27
1.1/2 6.35
5.55		 5.10 32
2 6.95
6.05		 5.55 38
2.1/2 8.75
7.65		 7.00 41.5
3 9.50
8.30		 7.60 57.5
4 10.70
9.35		 8.55 66.5

 

Contact Us Today For Buy Class 6000 Carbon Steel Socket Weld Cross At Best Price In India.

Class 6000 Socket Weld Cross Dimensions In MM

Normal Pipe Sizes Socket Bore Socket Depth Bore Diameter
B J D
1/2 21.95
21.70		 10 12.5
11
3/4 27.30
27.05		 13 16.3
14.8
1 34.05
33.80		 13 21.5
19.9
1.1/4 42.80
42.55		 13 30.2
28.7
1.1/2 48.90
48.65		 13 34.7
33.2
2 61.35
61.10		 16 43.6
42.1
1/2 5.95
5.20		 4.80 19.5
3/4 6.95
6.05		 5.55 22.5
1 7.90
6.95		 6.35 27
1.1/4 7.90
6.95		 6.35 32
1.1/2 8.90
7.80		 7.15 38
2 10.90
9.50		 8.75 41

 

IBR Approved Socket Weld Cross Fittings Manufacturer And Supplier In India.

 

Socket Weld Cross Fitting Size Chart According to ASME B16.11

 

Carbon Steel Socket Weld Cross Temperature Ratings Table

 

Tolerance Chart Of Forged Socket Weld Equal Cross

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Socket Center To Bottom For Size
1/8" And 1/4"		 ± 0.03"
3/8", 1/2" And 3/4" ± 0.06"
1", 1-1/4", 1-1/2" And 2" ± 0.08"
2-1/2", 3", And 4" ± 0.10"
"B" - Socket Bore Diameter For Size
1-1/2" And Smaller		 + 0.020"
- 0.000"
2", 2-1/2", 3" And 4" + 0.025"
- 0.000"
"C" - Socket Wall Thick. Min. = 1.09 T (But Not Less Than 5/32")
T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting For Size
2" And Smaller		 ± 0.030"
2-1/2", 3" And 4" ± 0.060"
"E" - Sockets- Bottom To Bottom - Full Couplings For Size
1/8" And 1/4"		 ± 0.06"
3/8", 1/2" And 3/4" ± 0.12"
1", 1-1/4", 1-1/2" And 2" ± 0.16"
2-1/2", 3", And 4" ± 0.20"
"F" - Bottom Of Socket To Opposite Face - ANSI B16.11 Half Couplings For Size
1/8" And 1/4"		 ± 0.03"
3/8", 1/2" And 3/4" ± 0.06"
1", 1-1/4", 1-1/2" And 2" ± 0.08"
2-1/2", 3", And 4" ± 0.10"
"G" - Gap Of Welding Approx. 0.06"
Before Welding Recommended Gap
"H" - Min. Flat Min. Flat = 0.75 X Min.
Socket Wall Thick.

 

Types Of ASME B16.11 SW Cross For Sale In India

1/3 Inch, 9000#, Stainless Steel Socket Weld Cross

2 Inch, ASME B16.11, 150 LB, Socket Weld Cross

DN25, CL3000, ASTM A182, Forged Steel Pipe Crosses

2×2 Inch, SW, 6000# ASME B16.11 Cross

 

2 Inch, ASME B16.11, Class 6000, Forged Socket Weld Equal Crosses

3 Inch, ASTM A105, 3000 LB, Socket Weld Equal Cross

2×3 Inch, A182, 3000LB, Stainless Steel Socket Weld Cross

3/4 Inch, ASTM A105, ANSI B16.11 SW Cross

 

 

2 X 1/2 Inch, ASTM A182 SS, Class 3000 SW Cross

2 × 2 Inch, ASTM A105N, 2000 LB, Carbon Steel SW Cross

 

Category:

Description

Socket Weld Cross Manufacturer in Italy 

Masiva Metal is a trusted Socket Weld Cross manufacturer in Italy, offering precision-engineered fittings with durable construction, accurate dimensions and reliable industrial performance. 

Socket Weld Cross Manufacturer in Belgium 

Masiva Metal manufactures Socket Weld Cross fittings in Belgium with quality materials, precise engineering, durable construction and dependable performance for industrial piping. 

Socket Weld Cross Manufacturer in UAE 

Masiva Metal is a trusted Socket Weld Cross manufacturer in UAE, delivering precision-engineered fittings with durable materials, accurate dimensions and consistent performance. 

Socket Weld Cross Manufacturer in Spain 

Masiva Metal manufactures Socket Weld Cross fittings in Spain, providing precision-fabricated products with quality materials, durable construction and reliable industrial performance. 

Socket Weld Cross Manufacturer in Germany 

Masiva Metal is a reliable Socket Weld Cross manufacturer in Germany, offering precision-engineered fittings with quality materials, accurate dimensions and durable construction. 

Socket Weld Cross Manufacturer in South Korea 

Masiva Metal is a trusted Socket Weld Cross manufacturer in South Korea, providing quality-engineered fittings with robust construction, precise dimensions and dependable performance. 

Socket Weld Cross Manufacturer in Vietnam 

Masiva Metal manufactures Socket Weld Cross fittings in Vietnam, offering quality products with precision dimensions, durable materials and reliable industrial performance. 

Socket Weld Cross Manufacturer in Philippines 

Masiva Metal is a trusted Socket Weld Cross manufacturer in the Philippines, delivering precision-engineered fittings with durable construction, accurate dimensions and reliable performance. 

Socket Weld Cross Manufacturer in Saudi Arabia 

Masiva Metal is a reliable Socket Weld Cross manufacturer in Saudi Arabia, offering durable, precision-engineered fittings designed for demanding industrial piping applications. 

Socket Weld Cross Supplier in Italy 

Masiva Metal is a reliable Socket Weld Cross supplier in Italy, providing quality fittings with precise dimensions for industrial piping systems and applications. 

Socket Weld Cross Supplier in Belgium 

Masiva Metal supplies Socket Weld Cross fittings in Belgium with accurate dimensions, quality construction and reliable solutions for demanding piping applications. 

Socket Weld Cross Supplier in UAE 

Masiva Metal is a dependable Socket Weld Cross supplier in UAE, offering quality fittings in multiple sizes and specifications for piping systems. 

Socket Weld Cross Supplier in Spain 

Masiva Metal is a trusted Socket Weld Cross supplier in Spain, supplying quality fittings with precise dimensions for industrial piping requirements. 

Socket Weld Cross Supplier in Germany 

Masiva Metal supplies Socket Weld Cross fittings in Germany with dependable quality, precise engineering and reliable solutions for industrial piping systems. 

Socket Weld Cross Supplier in South Korea 

Masiva Metal supplies Socket Weld Cross fittings in South Korea with accurate dimensions, durable construction and reliable solutions for industrial piping applications. 

Socket Weld Cross Supplier in Vietnam 

Masiva Metal is a dependable Socket Weld Cross supplier in Vietnam, providing quality fittings in various sizes and specifications for piping systems. 

Socket Weld Cross Supplier in Philippines 

Masiva Metal supplies Socket Weld Cross fittings in the Philippines with quality materials, precise dimensions and dependable solutions for industrial piping applications. 

Socket Weld Cross Supplier in Saudi Arabia 

Masiva Metal is a trusted Socket Weld Cross supplier in Saudi Arabia, providing quality fittings with accurate dimensions, durable construction and dependable performance. 

Customer Reviews

No reviews yet.

Related products