ASME B16.11 Elbow

What Is A Threaded Elbow?

Screwed Elbow are different specific types of elbows. 45 Degree Threaded Elbow differ according to the standards and use cases but their angle is denoted as 45 degree for the change of direction in fluid flow. Threaded Elbow Dimensions mainly depend on the connecting pipes and the radius of the curvature. The standards differ such as the 45 Degree Npt Elbow and the Asme B16.11 Threaded Elbow Fittings. The Asme B16.11 Threaded Elbow Material can differ but the nominal sizes for this standard are up to 4 inches.

45 Degree Threaded Elbow Use In Connecting Pipes?

Threaded 45 Deg Elbow or the 45 Deg Threaded Pipe Elbow has threads to be threaded onto the connecting pipes. In contrast to the most used welding methods, these are connected by threads. Welding is also applied when necessary. The ASME B16.11 Threaded Reducing Elbow has a different function as it reduces the pipe size from one end to the other. Asme B16.11 Gi Threaded Elbow is made up of GI material which is much corrosion resistant. GI stands for galvanized iron which has a coating over the steel to prevent oxidation. Sometimes the Grooved Threaded 45 Deg Elbow types are used; these have grooves and can install gaskets for extra tightness. Internal Threaded 45 Degree Elbow has threads inside the elbow and the pipe will have threads outside to fit onto this type.

Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.

Threaded 45 Deg Elbow Joint, Ms Threaded 45 Deg Elbow or the Stainless Steel Threaded 45 Deg Elbow could be used interchangeably. Npt Threaded Elbow comes under the national standards. Threaded Elbow Weight can differ with type and material; the Threaded Long Radius Elbow is heavier because of the longer radius. Ss Threaded 45 Degree Elbow is mostly used in low pressure systems. Short Radius Threaded 45 Degree Elbow has a shorter radius and is useful in narrow space operations. A105 Threaded 45 Degree Elbow is made up of A105 alloy and it is much corrosion resistant but the Brass Threaded 45 Degree Elbow is resistant to chloride ion corrosion cracking. In applications where the requirement mandates, the Threaded Conduit Elbow, the Gi Threaded Elbow or the type Elbow Threaded Grooved can be used.

EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.

Npt 45 Degree Street Elbow Brass are made up of brass to reduce corrosion and to make them low cost to be applied in low cost systems. Threaded Elbow Class 150 and the Threaded Elbow Class 3000 are two examples of their pressure classes.

ASME B16.11 Elbow Dimensions

Class 2000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Diameter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45° C
1/2	10.9	13.6	33	3.18	22
3/4	12.7	13.9	38	3.18	25
1	14.7	17.3	46	3.68	28
1.1/4	17	18	56	3.89	33
1.1/2	17.8	18.4	62	4.01	35
2	19	19.2	75	4.27	43
2.1/2	23.6	28.9	92	5.61	52
3	25.9	30.5	109	5.99	64
4	27.7	33	146	6.55	79

Class 3000 Threaded 45 Elbow Dimensions

Normal Pipe Size	Minimum Length of Thread		O.D. Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Size	B	J	D	G	45 Degree C
1/2	10.9	13.6	38	4.09	25
3/4	12.7	13.9	46	4.32	28
1	14.7	17.3	56	4.98	33
1.1/4	17	18	62	5.28	35
1.1/2	17.8	18.4	75	5.56	43
2	19	19.2	84	7.14	44
2.1/2	23.6	28.9	102	7.65	52
3	25.9	30.5	121	8.84	64
4	27.7	33	152	11.18	79

ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.

Class 6000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45 Degree C
1/2	10.9	13.6	46	8.15	28
3/4	12.7	13.9	56	8.53	33
1	14.7	17.3	62	9.93	35
1.1/4	17	18	75	10.59	43
1.1/2	17.8	18.4	84	11.07	44
2	19	19.2	102	12.09	52
2.1/2	23.6	28.9	121	15.29	64
3	25.9	30.5	146	16.64	79
4	27.7	33	152	18.67	79

Threaded 45 Deg Elbow Price List

Size	Class	Type Material	Price In India
1 NPS	6000#	ASTM A105	187.47
1-1/2 NPS	3000#	ASTM A105	76.89
1/2 NPS	3000#	ASTM A105N	78.98
3/4 NPS	6000#	ASTM A105N	120
2 NPS	3000#	A06E	260.5

Buy Now

Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.

Standard Specification Of Stainless Steel Threaded 45 Degree Elbow

Specification :	45 Degree Threaded Elbow
Standards	MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple)
Type Of Pipe systems	Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.
Material	Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel
Thread Connections	ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions).
Types Of Thread	NPT, BSPP, BSPT, PF, PT, MPT
Applications	Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection
Advantages	Simple Usage Easy installation Economic as cheaper
Size	Threaded Fittings = ½” – 4”
Pressure Rating	Threaded Fittings = Class 2000, Class 3000, Class 6000

45 Degree Npt Elbow Weight Chart

2000LBS

NPS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

–

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/16

4 5/16

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

2 1/16

2 1/2

3 1/8

Weight

–

0.188

0.236

0.435

0.740

1.058

1.375

1.740

2.883

7.750

11.313

19.125

3000LBS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

Weight

0.250

0.290

0.500

0.750

1.188

1.988

2.235

3.000

4.930

7.375

13.588

19.063

6000#

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

1 1/6

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

–

Weight

0.250

0.640

0.500

1.438

2.188

2.785

4.688

5.750

9.500

15.000

30.563

–

ASME B16.11 Threaded 45 Deg Elbow Pressure Rating


Threaded 45 Deg Elbow Pressure-Temperature
Temperature		Class
		150	300
			1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
(oF)	(oC)		1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
-20 to 150	-29 to 66	300	2000	1500	1000
200	93	265	1785	1350	910
250	121	225	1575	1200	825
300	149	185	1360	1050	735
350	177	150	1150	900	650
400	204	-	935	750	560
450	232	-	725	600	475
500	260	-	510	450	385
550	288	-	300	300	300

Screwed Elbow Tolerance Chart

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To Bottom	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"B" - Threaded Bore Diameter	For Size 1-1/2" And Smaller	+ 0.020" - 0.000"
"B" - Threaded Bore Diameter	2", 2-1/2", 3" And 4"	+ 0.025" - 0.000"
"C" - Threaded Wall Thick.	Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting	For Size 2" And Smaller	± 0.030"
"D" - Bore Diameter Of Pipe Fitting	2-1/2", 3" And 4"	± 0.060"
"E" - Threadeds- Bottom To Bottom - Full Couplings	For Size 1/8" And 1/4"	± 0.06"
	3/8", 1/2" And 3/4"	± 0.12"
	1", 1-1/4", 1-1/2" And 2"	± 0.16"
	2-1/2", 3", And 4"	± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"G" - Gap Of Welding	Approx. 0.06" Before Welding Recommended Gap
"H" - Min. Flat	Min. Flat = 0.75 X Min. Threaded Wall Thick.

Types Of 45 Degree Threaded Elbow For Sale

1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow

Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow

ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass

2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow

1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow

ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow

2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow

ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows

1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows

ASME B16.11, PN400, DN80, Brass Threaded Elbows

Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows

ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000

What Is A Threaded Elbow?

45 Degree Threaded Elbow Use In Connecting Pipes?

Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.

EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.

ASME B16.11 Elbow Dimensions

Class 2000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Diameter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45° C
1/2	10.9	13.6	33	3.18	22
3/4	12.7	13.9	38	3.18	25
1	14.7	17.3	46	3.68	28
1.1/4	17	18	56	3.89	33
1.1/2	17.8	18.4	62	4.01	35
2	19	19.2	75	4.27	43
2.1/2	23.6	28.9	92	5.61	52
3	25.9	30.5	109	5.99	64
4	27.7	33	146	6.55	79

Class 3000 Threaded 45 Elbow Dimensions

Normal Pipe Size	Minimum Length of Thread		O.D. Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Size	B	J	D	G	45 Degree C
1/2	10.9	13.6	38	4.09	25
3/4	12.7	13.9	46	4.32	28
1	14.7	17.3	56	4.98	33
1.1/4	17	18	62	5.28	35
1.1/2	17.8	18.4	75	5.56	43
2	19	19.2	84	7.14	44
2.1/2	23.6	28.9	102	7.65	52
3	25.9	30.5	121	8.84	64
4	27.7	33	152	11.18	79

ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.

Class 6000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45 Degree C
1/2	10.9	13.6	46	8.15	28
3/4	12.7	13.9	56	8.53	33
1	14.7	17.3	62	9.93	35
1.1/4	17	18	75	10.59	43
1.1/2	17.8	18.4	84	11.07	44
2	19	19.2	102	12.09	52
2.1/2	23.6	28.9	121	15.29	64
3	25.9	30.5	146	16.64	79
4	27.7	33	152	18.67	79

Threaded 45 Deg Elbow Price List

Size	Class	Type Material	Price In India
1 NPS	6000#	ASTM A105	187.47
1-1/2 NPS	3000#	ASTM A105	76.89
1/2 NPS	3000#	ASTM A105N	78.98
3/4 NPS	6000#	ASTM A105N	120
2 NPS	3000#	A06E	260.5

Buy Now

Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.

Standard Specification Of Stainless Steel Threaded 45 Degree Elbow

Specification :	45 Degree Threaded Elbow
Standards	MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple)
Type Of Pipe systems	Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.
Material	Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel
Thread Connections	ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions).
Types Of Thread	NPT, BSPP, BSPT, PF, PT, MPT
Applications	Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection
Advantages	Simple Usage Easy installation Economic as cheaper
Size	Threaded Fittings = ½” – 4”
Pressure Rating	Threaded Fittings = Class 2000, Class 3000, Class 6000

45 Degree Npt Elbow Weight Chart

2000LBS

NPS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

–

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/16

4 5/16

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

2 1/16

2 1/2

3 1/8

Weight

–

0.188

0.236

0.435

0.740

1.058

1.375

1.740

2.883

7.750

11.313

19.125

3000LBS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

Weight

0.250

0.290

0.500

0.750

1.188

1.988

2.235

3.000

4.930

7.375

13.588

19.063

6000#

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

1 1/6

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

–

Weight

0.250

0.640

0.500

1.438

2.188

2.785

4.688

5.750

9.500

15.000

30.563

–

ASME B16.11 Threaded 45 Deg Elbow Pressure Rating


Threaded 45 Deg Elbow Pressure-Temperature
Temperature		Class
		150	300
			1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
(oF)	(oC)		1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
-20 to 150	-29 to 66	300	2000	1500	1000
200	93	265	1785	1350	910
250	121	225	1575	1200	825
300	149	185	1360	1050	735
350	177	150	1150	900	650
400	204	-	935	750	560
450	232	-	725	600	475
500	260	-	510	450	385
550	288	-	300	300	300

Screwed Elbow Tolerance Chart

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To Bottom	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"B" - Threaded Bore Diameter	For Size 1-1/2" And Smaller	+ 0.020" - 0.000"
"B" - Threaded Bore Diameter	2", 2-1/2", 3" And 4"	+ 0.025" - 0.000"
"C" - Threaded Wall Thick.	Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting	For Size 2" And Smaller	± 0.030"
"D" - Bore Diameter Of Pipe Fitting	2-1/2", 3" And 4"	± 0.060"
"E" - Threadeds- Bottom To Bottom - Full Couplings	For Size 1/8" And 1/4"	± 0.06"
	3/8", 1/2" And 3/4"	± 0.12"
	1", 1-1/4", 1-1/2" And 2"	± 0.16"
	2-1/2", 3", And 4"	± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"G" - Gap Of Welding	Approx. 0.06" Before Welding Recommended Gap
"H" - Min. Flat	Min. Flat = 0.75 X Min. Threaded Wall Thick.

Types Of 45 Degree Threaded Elbow For Sale

1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow

Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow

ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass

2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow

1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow

ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow

2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow

ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows

1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows

ASME B16.11, PN400, DN80, Brass Threaded Elbows

Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows

ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000

What Is A Threaded Elbow?

45 Degree Threaded Elbow Use In Connecting Pipes?

Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.

EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.

ASME B16.11 Elbow Dimensions

Class 2000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Diameter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45° C
1/2	10.9	13.6	33	3.18	22
3/4	12.7	13.9	38	3.18	25
1	14.7	17.3	46	3.68	28
1.1/4	17	18	56	3.89	33
1.1/2	17.8	18.4	62	4.01	35
2	19	19.2	75	4.27	43
2.1/2	23.6	28.9	92	5.61	52
3	25.9	30.5	109	5.99	64
4	27.7	33	146	6.55	79

Class 3000 Threaded 45 Elbow Dimensions

Normal Pipe Size	Minimum Length of Thread		O.D. Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Size	B	J	D	G	45 Degree C
1/2	10.9	13.6	38	4.09	25
3/4	12.7	13.9	46	4.32	28
1	14.7	17.3	56	4.98	33
1.1/4	17	18	62	5.28	35
1.1/2	17.8	18.4	75	5.56	43
2	19	19.2	84	7.14	44
2.1/2	23.6	28.9	102	7.65	52
3	25.9	30.5	121	8.84	64
4	27.7	33	152	11.18	79

ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.

Class 6000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45 Degree C
1/2	10.9	13.6	46	8.15	28
3/4	12.7	13.9	56	8.53	33
1	14.7	17.3	62	9.93	35
1.1/4	17	18	75	10.59	43
1.1/2	17.8	18.4	84	11.07	44
2	19	19.2	102	12.09	52
2.1/2	23.6	28.9	121	15.29	64
3	25.9	30.5	146	16.64	79
4	27.7	33	152	18.67	79

Threaded 45 Deg Elbow Price List

Size	Class	Type Material	Price In India
1 NPS	6000#	ASTM A105	187.47
1-1/2 NPS	3000#	ASTM A105	76.89
1/2 NPS	3000#	ASTM A105N	78.98
3/4 NPS	6000#	ASTM A105N	120
2 NPS	3000#	A06E	260.5

Buy Now

Please note this is an approx Price of 45 Deg Threaded Elbow in India. For final ASME B16.11 Elbow Price List Please Call on +91 - 22 - 67437342 or drop an Email to info@rajtilakmetal.com.

Most Frequent Types Of NPT 3000 LBS Grooved Screwed 45 Degree Elbow, Check Market Price Before You Buy ASME B16.11 45 Degree Threaded Elbows Fittings In Mumbai, India.

Standard Specification Of Stainless Steel Threaded 45 Degree Elbow

Specification :	45 Degree Threaded Elbow
Standards	MSS SP 79, JIS B2302, MSS-SP-97 (Threadolet), MSS-SP-83 (Union), ASME B16.11 (American Standard), Bs3799, ASME B36.19 (Nipple)
Type Of Pipe systems	Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple, 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee.
Material	Stainless Steel (ASTM-182) Alloy Steel (ASTM-182) Low Alloy Steel (ASTM-350) Carbon Steel (ASTM-105) Duplex Steel Cooper Nickel
Thread Connections	ASME B16.34 (Valves — Flanged), ASME B16.39 (Malleable Iron Pipe Unions, 150#, 250#, Or 300#), ASME B16.11 (Socket Welding and Threaded), MSS-SP-83 (Class Unions), ASME B16.3 (Malleable Iron Fittings), ASME B16.4 ( Gray Iron Fittings), ASME B16.39 (Malleable Iron Unions).
Types Of Thread	NPT, BSPP, BSPT, PF, PT, MPT
Applications	Oil and Gas Chemical Water Pipeline Noncritical Applications Power station Fire Protection
Advantages	Simple Usage Easy installation Economic as cheaper
Size	Threaded Fittings = ½” – 4”
Pressure Rating	Threaded Fittings = Class 2000, Class 3000, Class 6000

45 Degree Npt Elbow Weight Chart

2000LBS

NPS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

–

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/16

4 5/16

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

2 1/16

2 1/2

3 1/8

Weight

–

0.188

0.236

0.435

0.740

1.058

1.375

1.740

2.883

7.750

11.313

19.125

3000LBS

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

29/32

1 1/16

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

Weight

0.250

0.290

0.500

0.750

1.188

1.988

2.235

3.000

4.930

7.375

13.588

19.063

6000#

1/8

1/4

3/8

1/2

3/4

1 1/4

1 1/2

2 1/2

1 1/6

1 5/16

1 9/16

1 27/32

2 7/32

2 1/2

3 1/32

3 11/32

4 3/4

5 3/4

–

3/4

1 1/8

1 1/4

1 5/16

1 3/8

1 11/16

1 3/4

2 1/16

2 1/2

3 1/8

–

Weight

0.250

0.640

0.500

1.438

2.188

2.785

4.688

5.750

9.500

15.000

30.563

–

ASME B16.11 Threaded 45 Deg Elbow Pressure Rating


Threaded 45 Deg Elbow Pressure-Temperature
Temperature		Class
		150	300
			1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
(oF)	(oC)		1/4 - 1 inch.	1 1/4 - 2 inch.	2 1/2 - 3 inch.
-20 to 150	-29 to 66	300	2000	1500	1000
200	93	265	1785	1350	910
250	121	225	1575	1200	825
300	149	185	1360	1050	735
350	177	150	1150	900	650
400	204	-	935	750	560
450	232	-	725	600	475
500	260	-	510	450	385
550	288	-	300	300	300

Screwed Elbow Tolerance Chart

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To Bottom	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"B" - Threaded Bore Diameter	For Size 1-1/2" And Smaller	+ 0.020" - 0.000"
"B" - Threaded Bore Diameter	2", 2-1/2", 3" And 4"	+ 0.025" - 0.000"
"C" - Threaded Wall Thick.	Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting	For Size 2" And Smaller	± 0.030"
"D" - Bore Diameter Of Pipe Fitting	2-1/2", 3" And 4"	± 0.060"
"E" - Threadeds- Bottom To Bottom - Full Couplings	For Size 1/8" And 1/4"	± 0.06"
	3/8", 1/2" And 3/4"	± 0.12"
	1", 1-1/4", 1-1/2" And 2"	± 0.16"
	2-1/2", 3", And 4"	± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"G" - Gap Of Welding	Approx. 0.06" Before Welding Recommended Gap
"H" - Min. Flat	Min. Flat = 0.75 X Min. Threaded Wall Thick.

Types Of 45 Degree Threaded Elbow For Sale

1 1/2 Inch, A351 CF8M, Class 150 LB, ANSI B16.11, Screwed Elbow

Class 3000, A182 F304L, 1/2 Inch, NPT, 45 Degree Threaded Elbow

ASME B16.11, 1 1/2 Inch, Class 3000, Npt 45 Deg Street Elbow Brass

2 Inch, 6000LB, A182 F11, B16.11, Threaded Reducing Elbow

1/2 Inch, 3000LB, F304H, ASME B16.11, Internal Threaded Elbow

ASTM A182 F316, 1/2 Inch, 9000LB, FNPT Ends, Threaded Long Radius Elbow

2000LB, ASME B16.11, 2 Inch, Stainless Steel Threaded Elbow

ASTM A105, 1.5 Inch, NPT Ends, Carbon Steel 45 Deg Threaded Elbows

1 inch, Threaded 125#, Black Cast Iron, Seamless 45 Deg Elbows

ASME B16.11, PN400, DN80, Brass Threaded Elbows

Galvanized, ASTM A105, CL3000, 3 Inch, ASME B16.11 45 Deg Threaded Elbows

ASTM A350 LF2, DN20, PN400, Threaded Elbows Class 3000

What Is A Threaded Elbow?

45 Degree Threaded Elbow Use In Connecting Pipes?

Refer Stainless Steel Threaded 45 Deg Elbow Weight Chart According to Manufacturer Of ANSI B16.11 And NPT 45 Degree Street Elbows In India.

EIL Approved Carbon Steel 45 Degree NPT Elbow Manufacturer In India, Temperature Ratings Of 45° Threaded Reducing Elbows.

ASME B16.11 Elbow Dimensions

Class 2000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Diameter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45° C
1/2	10.9	13.6	33	3.18	22
3/4	12.7	13.9	38	3.18	25
1	14.7	17.3	46	3.68	28
1.1/4	17	18	56	3.89	33
1.1/2	17.8	18.4	62	4.01	35
2	19	19.2	75	4.27	43
2.1/2	23.6	28.9	92	5.61	52
3	25.9	30.5	109	5.99	64
4	27.7	33	146	6.55	79

Class 3000 Threaded 45 Elbow Dimensions

Normal Pipe Size	Minimum Length of Thread		O.D. Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Size	B	J	D	G	45 Degree C
1/2	10.9	13.6	38	4.09	25
3/4	12.7	13.9	46	4.32	28
1	14.7	17.3	56	4.98	33
1.1/4	17	18	62	5.28	35
1.1/2	17.8	18.4	75	5.56	43
2	19	19.2	84	7.14	44
2.1/2	23.6	28.9	102	7.65	52
3	25.9	30.5	121	8.84	64
4	27.7	33	152	11.18	79

ANSI / ASME B16.11 Screwed Elbow Available in A Wide Range Of Grades Or Shape And Material.

Class 6000 Threaded 45 Elbow Dimensions

Normal Pipe Sizes	Minimum Length of Thread		Outside Daimeter of Band	Minimum Weight	Center to End
Normal Pipe Sizes	B	J	D	G	45 Degree C
1/2	10.9	13.6	46	8.15	28
3/4	12.7	13.9	56	8.53	33
1	14.7	17.3	62	9.93	35
1.1/4	17	18	75	10.59	43
1.1/2	17.8	18.4	84	11.07	44
2	19	19.2	102	12.09	52
2.1/2	23.6	28.9	121	15.29	64
3	25.9	30.5	146	16.64	79
4	27.7	33	152	18.67	79

Threaded 45 Deg Elbow Price List

Size	Class	Type Material	Price In India
1 NPS	6000#	ASTM A105	187.47
1-1/2 NPS	3000#	ASTM A105	76.89
1/2 NPS	3000#	ASTM A105N	78.98
3/4 NPS	6000#	ASTM A105N	120
2 NPS	3000#	A06E	260.5

Buy Now

Please note this is an approx Price of

Category: Threaded Fittings

Description
Reviews (0)

Description

ASME B16.11 Elbow Manufacturer

Masiva Solutions manufactures ASME B16.11 elbows for industrial piping applications, offering reliable forged fabrication, precise dimensions, quality-focused production, and export support for engineering and process industries across global markets worldwide.

ASME B16.11 Elbow Supplier

Masiva Solutions supplies ASME B16.11 elbows for industrial piping applications, providing reliable sourcing, forged fabrication, precise dimensions, quality-focused production, and export support for engineering and process industries across global markets.

ASME B16.11 Forged Elbow Manufacturer

Masiva Solutions manufactures ASME B16.11 forged elbows for industrial piping systems, supporting engineering projects with reliable fabrication, precise dimensions, quality-focused production, and export assistance across international markets and industries worldwide.

ASME B16.11 Forged Elbow Supplier

Masiva Solutions supplies ASME B16.11 forged elbows for industrial piping applications, offering dependable sourcing, precise fabrication, consistent quality, and export support for engineering and process industries across global markets worldwide.

ASME B16.11 Elbow Manufacturer Italy

Masiva Solutions manufactures ASME B16.11 elbows for Italy, supporting industrial piping projects with reliable forged fabrication, precise dimensions, consistent quality, and export assistance for engineering and process industries across global markets.

ASME B16.11 Elbow Manufacturer Belgium

Masiva Solutions manufactures ASME B16.11 elbows for Belgium, offering reliable forged fabrication, precise dimensions, consistent quality, and export support for industrial piping, engineering, maintenance, and process applications across global markets.

ASME B16.11 Elbow Supplier UAE

Masiva Solutions supplies ASME B16.11 elbows to UAE, supporting industrial piping applications with reliable sourcing, forged fabrication, precise dimensions, quality-focused production, and export assistance for engineering and process industries across markets.

ASME B16.11 Elbow Manufacturer Spain

Masiva Solutions manufactures ASME B16.11 elbows for Spain, supporting industrial piping applications through reliable forged fabrication, precise dimensions, consistent quality, and export assistance for engineering and process industries across global markets.

ASME B16.11 Elbow Manufacturer Germany

Masiva Solutions manufactures ASME B16.11 elbows for Germany, offering forged fabrication, precise dimensions, consistent quality, and export support for industrial piping, engineering, maintenance, and process applications across global markets worldwide.

ASME B16.11 Elbow Supplier South Korea

Masiva Solutions supplies ASME B16.11 elbows to South Korea, supporting industrial piping applications through reliable sourcing, forged fabrication, precise dimensions, consistent quality, and export assistance across engineering and process industries worldwide.

ASME B16.11 Elbow Manufacturer Vietnam

Masiva Solutions manufactures ASME B16.11 elbows for Vietnam, offering reliable forged fabrication, precise dimensions, consistent quality, and export support for industrial piping, engineering, maintenance, and process applications across global markets worldwide.

ASME B16.11 Elbow Supplier Philippines

Masiva Solutions supplies ASME B16.11 elbows to Philippines, supporting industrial piping applications through reliable sourcing, forged fabrication, precise dimensions, consistent quality, and export assistance for engineering and process industries across global markets.

ASME B16.11 Elbow Manufacturer Saudi Arabia

Masiva Solutions manufactures ASME B16.11 elbows for Saudi Arabia, offering reliable forged fabrication, precise dimensions, consistent quality, and export support for industrial piping, engineering, maintenance, and process applications across global markets.

ASME B16.11 Socket Weld Elbow

Masiva Solutions supplies ASME B16.11 socket weld elbows for industrial piping, supporting reliable fabrication, precise dimensions, quality-focused production, and export requirements across engineering and process industries worldwide for projects.

ASME B16.11 Threaded Elbow

Masiva Solutions supplies ASME B16.11 threaded elbows for industrial piping applications, offering reliable fabrication, precise threading, consistent quality, and export support for engineering and process industries across global markets worldwide.

ASME B16.11 90 Degree Elbow

Masiva Solutions supplies ASME B16.11 90 degree elbows for industrial piping applications, supporting reliable fabrication, precise dimensions, consistent quality, and export requirements across engineering and process industries worldwide.

ASME B16.11 45 Degree Elbow

Masiva Solutions supplies ASME B16.11 45 degree elbows for industrial piping applications, offering reliable fabrication, precise dimensions, consistent quality, and export support for engineering and process industries across global markets.

ASME B16.11 Elbow Exporter

Masiva Solutions exports ASME B16.11 elbows for industrial piping applications, providing dependable fabrication, precise dimensions, quality-focused production, and international supply support for engineering and process industries worldwide across global markets.

Industrial ASME B16.11 Elbow Supplier

Masiva Solutions supplies industrial ASME B16.11 elbows for piping applications, focusing on reliable sourcing, forged fabrication, precise dimensions, consistent quality, and export support for demanding engineering projects worldwide across industries.

ASME B16.11 Elbow Supplier Saudi Arabia UAE

Masiva Solutions supplies ASME B16.11 elbows to Saudi Arabia and UAE, supporting industrial piping projects with reliable sourcing, forged fabrication, consistent quality, and international export assistance across industries worldwide.

Customer Reviews

No reviews yet.