MSS SP-97 Weldolet
Category: Socket Weld Fittings

MSS SP-97 Weldolet

What Is MSS SP-97

 

These mss sp-97 weldolet SW fittings are known to offer an outlet from a large pipe to a smaller one. Run or header in any weldolet refers to the side that welded connection to the main pipe. While the other side of the weldolet is a branch or outlet which provides a smaller channel.

MSS SP 97 Weldolet

MSS SP-97 Sockolet

MSS-SP 97 Threadolet

 

Table of contents

  • What MSS SP-97 Weldolet Used Branch Connection?
  • Weldolet Bw Mss Sp 97 Specification
  • MSS Sp-97 Weldolet Dimensions
  • MSS Sp-97 Sockolet Dimensions
  • MSS Sp-97 Threadolet Dimensions
  • MSS Sp-97 Elbolet Dimensions
  • MSS Sp-97 Nipolet Dimensions
  • MSS Sp-97 Latrolet Dimensions
  • MSS Sp-97 Sweepolet Dimensions
  • MSS Sp-97 Insert Weldolet Dimensions
  • MSS Sp-97 Brazolet Dimensions
  • MSS Sp-97 Coupolet Dimensions
  • Weldolet Std Mss Sp 97 Size Chart
  • Most Selling Types Of MSS SP 97

What MSS SP-97 Weldolet Used Branch Connection?

 

The mss sp-97 Sockolet is the most commonly utilized one out of all branch connections, and the fitting is welded onto the outlet pipe. The ends of the MSS SP-97 Threadolet are manufactured in a bevel shape in order to facilitate this process. Hence, a weldolet is considered to be a butt-weld fitting. The mss sp-97 weldolet Dimensions have been designed to not only minimize stress concentrations but also to provide integral reinforcement. Olets, specifically speaking the Stainless Steel Socket mss sp-97 Latrolet is considered to be a reinforced branch connection fitting. Before the ubiquitous use of olet fittings such as the 3000 lb mss sp-97 weldolet, people usually preferred the use of either a reducing tee or a reinforced pipe for the connection of branches. At our factory, we produce Forged Pipe mss sp-97 Sockolet for which the branch diameter is available from 1/8 inch to about 24 along with the wall thickness being  available in STD, XS and Sch 160.

 

 

Socket Weld mss sp-97 weldolet is the most commonly used branch connection fitting. Even through the ends of this fitting is bevel shaped and butt welded to pipes, weldolets do not belong to ASME B16.9 buttweld fittings. Because of the fabrication technique used on the weldolet SW mss sp 97 std, it is often classified to forged fittings. However, the expression of wall thickness tends to be similar to butt weld fittings.

What Is Use Of MSS SP-97 In Pipe Connection, Manufacturer Of Forged Pipe MSS SP-97 in India.

Weldolet Bw Mss Sp 97 Specification

Specification : MSS SP-97 Weldolet
Standards JIS B2302, MSS SP 95, ASME B16.11, Bs3799, MSS SP 79, MSS SP 83
Threaded : No Threaded
Material : Stainless Steel, Carbon Steel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Alloy Steel, Mild Steel, Duplex Steel & Super Duplex Steel, Wrought Iron.
ASME B16.11 Tolerance : 0.06 inches (1.6 millimeter)
Size Socket Weld Fittings = ½” – 8”
Pressure Rating : Socket Weld Fittings = 2000LB, 3000LB, 6000LB
Types : 45 Deg Elbow, Equal tee, Full Coupling, Reducing Tee, 90 Deg Elbow, Half Coupling, Street Elbow, Bull Plug, Boss, Union (Male/Female), Lateral Outlet, 45 Lateral Tee, Equal Cross, Pipe Cap, Branch Outlets, Swage Nipple.
MSS SP-95 : Bull Plugs & Swage(d) Nipples
Minimum Wall Thickness: 12.5%, minimum wall thickness
Finishing: Carbon Steel : Gavlvanized Or Black
Stainless Steel : Pickled
Schedule 3000 - Schedule 80/XS, 6000 - Schedule 160, 9000 Schedule XXS.

 

Refer MSS SP-97 Sockolet Dimensions And MSS SP 97 Threadolet Dimensions.

MSS Sp-97 Weldolet Dimensions

 

Run Pipe Normal Pipe Size Run Pipe Sch. Dimensions Of Weldolet
NPS SCH. 2″ 3″ 4″ 6″ 8″ 10″ 12″ 14″ 16″ 18″ 20″ 24″
2″ STD-40
XS-80		 70
XXS-160 87
3″ STD-40
XS-80		 84 91
XXS-160 101 119
4″ STD-40
XS-80		 97 103 111
XXS-160 114 132 144
STD-40 124 130 138 148
6″ XS-80 124 130 138 165
XXS-160 141 159 171 192
STD-40 149 156 164 176 183
8″ XS-80 149 156 164 191 197
XXS-160 167 184 197 218 224
STD-40 176 183 191 205 210 218
10″ XS-80 176 183 191 218 238 235
XXS-160 194 211 224 245 251 265
STD 202 208 216 228 255 245 251
12″ XS 202 208 216 243 264 267 265
XXS-160 219 237 249 270 276 291 324
14″ STD 218 224 232 245 251 259 267 270
XS 218 224 231 239 279 270 278 286
16″ STD 243 249 257 270 276 284 292 295 300
XS 243 249 257 284 305 293 303 306 319
18″ STD 268 275 283 295 302 310 318 321 325 335
XS 268 275 283 310 330 321 329 332 338 352
20″ STD 294 300 308 321 327 335 343 346 351 356 376
XS 294 300 308 335 356 346 354 557 364 370 386
24″ STD 345 351 359 372 378 386 394 397 402 406 411 446
XS 345 351 359 386 406 397 405 408 414 421 429 449

 

MSS Sp-97 Sockolet Dimensions

 

Normal Pipe Size A B C D E
1/2″ 25.4 35.71 23.01 15.8 14.28
3/4″ 26.98 43.65 29.36 20.93 14.28
1″ 33.33 50.8 36.51 26.64 19.84
1 1/4″ 33.33 65.08 44.45 35.05 19.05
1 1/2″ 34.92 72.23 50.8 40.89 19.05
2″ 38.1 88.1 65.08 52.5 20.63
2 1/2″ 39.68 103.18 76.2 62.71 19.05
3″ 44.45 122.23 93.66 77.93 23.81
3 1/2″ 42.86 136.52 112.71 90.12 17.46
4″ 47.62 151.6 120.65 102.26 26.98
5″ 66.67 185.73 141.28 128.19 34.13
6″ 69.85 219.07 169.86 154.05 35.71
1/2″ 31.75 43.65 19.05 11.84 22.22
3/4″ 36.51 49.6 25.4 15.6 22.22
1″ 39.68 61.91 33.33 20.7 23.81
1 1/4″ 41.27 69.05 38.1 29.46 20.63
1 1/2″ 42.86 82.55 49.21 33.99 22.22
2″ 52.38 102.39 69.85 42.9 30.16

 

MSS Sp-97 Threadolet Dimensions

 

NPS Face to Crotch (L)
Class 3000 Class 6000
1/8" 19 –
1/4" 19 –
3/8" 21 –
1/2" 25 32
3/4" 27 37
1" 33 40
1 1/4" 33 41
1 1/2" 35 43
2" 38 52
2 1/2" 46 –
3" 51 –
4" 57 –

 

MSS Sp-97 Elbolet Dimensions

 

Nominal
Elbow Sizes In
Inches		 Outlet Size In
Inches		 Dimensions
Class 3000 Threaded &
Socket Weld Std. & XS Butt-Weld		 Class 6000 Threaded &
Socket-Weld Sch. 160 & XXS ButtWeld
C E C E
36 - 3/4 1/4 1 1/2 1 19/32 1 1/2 1 19/32
36 - 3/4 3/8 1 1/2 1 19/32 1 1/2 1 19/32
36 - 3/4 1/2 1 1/2 1 19/32 1 23/32 1 7/8
36 - 1 3/4 1 23/32 1 7/8 2 1/4 2 1/4
36 - 2 1 2 1/4 2 1/4 2 7/8 2 1/2
36 - 2 1 1/4 2 7/8 2 1/2 3 1/8 2 11/16
36 - 2 1 1/2 3 1/8 2 11/16 4 3/16 3 1/4
36 - 3 2 4 3/16 3 1/4
**2 1/2 4 3/16 3 1/4
**3 5 1/16 3 7/8
Order to Specific **4 6 5/8 4 13/16
Elbow Sizes **6 9 3/8 6 1/2 ** **
**8 13 5/16 8 1/16
**10 17 1/32 10 3/8
**12 19 5/8 11 1/8

 

Refer MSS SP-97 Sockolet Dimensions And MSS SP 97 Threadolet Dimensions.

MSS Sp-97 Nipolet Dimensions

 

NPS Face to Crotch (L)
Class 3000 Class 6000
1/8" 19 –
1/4" 19 –
3/8" 21 –
1/2" 25 32
3/4" 27 37
1" 33 40
1 1/4" 33 41
1 1/2" 35 43
2" 38 52
2 1/2" 46 –
3" 51 –
4" 57 –

 

MSS Sp-97 Latrolet Dimensions

NPS Face to Crotch (L)
Class 3000 Class 6000
1/8" 19 –
1/4" 19 –
3/8" 21 –
1/2" 25 32
3/4" 27 37
1" 33 40
1 1/4" 33 41
1 1/2" 35 43
2" 38 52
2 1/2" 46 –
3" 51 –
4" 57 –

 

MSS Sp-97 Sweepolet Dimensions

 

Normal Run Size Outlet Size In
Inch.		 Dimensions
*A B
6 to 36 1 1/4 1 1/4 4
6 to 36 1 1/2 1 3/4 5 1/2
6 to 36 2 1 1/2 5 1/2
6 to 36 3 1 21/32 7
6 to 36 4 2 1/32 8 3/4
10 to 36 6 2 11/16 13
12 to 36 8 3 15
16 to 36 10 3 1/8 18 1/2
16 to 36 12 3 5/16 20 1/2
20 to 36 14 3 5/8 24
24 to 36 16 3 3/4 28
24 to 36 18 4 5/8 31
24 to 36 20 5 1/8 33
30 to 36 24 5 5/8 38

 

MSS Sp-97 Insert Weldolet Dimensions

Normal Outlet
Size		 (Height above run pipe) A' Dimensions
1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24
Std Wt Run Pipe 1.50 1.50 1.62 1.75 2.00 2.25 2.38 2.75 3.06 3.38 3.50 3.75 3.81 4 4.56
XS Run Pipe 1.50 1.50 1.62 1.75 2.00 2.25 3.06 3.87 3.69 4.06 3.81 4.19 4.38 4.69 5.50
.500" to .750" Thickness Run Pipe - - - 2.88 3.31 3.75 4.12 4.18 4.25 4.37 4.50 4.69 5.13 5.62 6.50
.750" to 1.00" Thickness Run Pipe - - - 3.22 3.38 3.75 4.34 4.62 4.84 5.10 5.25 5.88 6.50 6.75 7.62
1.00" to 1.25" Thickness Run Pipe - - - 3.38 3.50 4.00 4.50 4.88 5.00 5.38 5.50 6.00 6.50 7.00 8.00
1.25" to 1.50" Thickness Run Pipe - - - 3.62 3.87 4.25 4.69 5.16 5.31 5.68 5.81 6.44 6.50 7.56 8.72
Normal Outlet
Size		 *'W' Dimensions (Maximum Outside Daimeter of pipe fittings - Maximum size of hole)
1 1/2 2 2 1/2 3 4 5 6 8 10 12 14 16 18 20 24
Std Wt Run Pipe 3.50 4.25 4.88 5.69 7.00 8.06 9.71 11.71 14.00 16.32 17.56 19.75 22.00 24.00 29.00
XS Run Pipe 3.56 4.38 5.00 5.75 7.12 8.25 10.44 13.44 14.25 16.56 18.00 20.00 22.44 25.00 30.32

 

MSS Sp-97 Brazolet Dimensions

Normal Outlet Sizes A B C Brazing Surface F-MINIMUM MIL-1183
1/4 11/16 1 9/16 0.188 0.700
3/8 13/16 1 1/4 3/4 0.190 0.855
1/2 1 1 7/16 7/8 0.220 1.020
3/4 1 1/16 1 3/4 1 1/8 0.240 1.250
1 1 1/4 2 1/8 1 7/16 0.270 1.535
1 1/4 1 5/16 2 9/16 1 3/4 0.300 1.900
1 1/2 1 3/8 2 7/8 2 0.330 2.160
2 1 1/2 3 1/2 2 9/16 0.360 2.675
2 1/2 1 13/16 4 1/8 3 0.384 3.215
3 2 4 13/16 3 11/16 0.442 3.880
4 2 1/4 6 4 3/4 0.476 4.940
5 2 5/8 7 1/16 5 9/16 0.656 6.163
Normal Outlet Sizes A B C Brazing Surface F-Minimum. MIL-1183
1/4 11/16 1 9/16 0.188 0.700
3/8 13/16 1 1/4 3/4 0.190 0.855
1/2 13/16 1 1/4 3/4 0.190 0.855
3/4 1 1 7/16 7/8 0.220 1.020
1 1 1/16 1 3/4 1 1/8 0.240 1.250
1 1/4 1 1/4 2 1/8 1 7/16 0.270 1.535
1 1/2 1 5/16 2 9/16 1 3/4 0.300 1.900
2 1 3/8 2 7/8 2 0.330 2.160
2 1/2 1 1/2 3 1/2 2 9/16 0.360 2.675
3 1 13/16 4 1/8 3 0.384 3.215
4 2 1/8 5 1/2 4 5/16 0.437 4.400

 

MSS Sp-97 Coupolet Dimensions

Class 300 Female Threaded Coupolet
Nominal
Outlet Size (NOS)		 Dimensions
A C F
1/2 15/16 0.745 1.188
3/4 1 0.958 1.441
1 1 3/16 1.188 1.562
1 1/4 1 5/16 1.550 1.906
1 1/2 1 9/16 1.780 2.188
2 1 11/16 2.260 2.750
2 1/2 1 13/16 2.890 3.386
3 2 1/2 3.400 4.000
4 3 4.380 5.000

 

We are One Of The Top 5 Stainless Steel Socket MSS SP-97 Weldolet Manufacturer And Supplier In India.

Weldolet Std Mss Sp 97 Size Chart

Weldolet Size In inches A B C D Weight Of Weldolet in LBS
 1/2 3/4 1 3/8 15/16  5/8 0.15
 3/4 7/8 1 5/8 1  3/16 13/16 0.25
1 1  1/16 2 1  7/16 1  1/32 0.4
1 1/4 1 1/4 2 3/8 1 3/4 1 3/8 0.7
1 1/2 1  5/16 2 7/8 2 1 5/8 0.8
2 1 1/2 3 1/2 2  9/16 2  1/16 1.5
2 1/2 1 5/8 4 1/6 3 2  7/16 2.25
3 1 3/4 4 13/16 3 11/16 3  1/16 3.75
3 1/2 2 5 3/8 3 7/8 3  9/16 5
4 2 6 4 3/4 4 6.7
5 2 1/4 7 1/8 5  9/16 5  1/16 8.5
6 2 3/8 8 1/2 6 11/16 6  1/16 14
8 2 3/4 10 3/8 8 11/16 7 15/16 28
10 3  1/16 12  9/16 10 13/16 10 39
12 3 3/8 14 7/8 12 13/16 12 65
14 3 1/2 16 1/8 14  1/16 13 1/4 70
16 3 11/16 18 1/4 16  1/16 15 1/4 92
18 4  1/16 20 3/4 18 5/8 17 1/4 125
20 4 5/8 23  1/16 20  1/16 19 1/4 175
24 5 3/8 27 7/8 25 1/8 23 1/4 280
30 5 3/8 34  1/16 30  7/16 29 1/4 440
36 5 3/8 34  1/16 36 1/2 35 1/4 1180

 

Most Selling Types Of MSS SP 97

MSS SP 97 Sockolet

MSS Sp 97 Thredolet

MSS Sp-97 Latrolet

MSS Sp 97 Elbolet

 

MSS SP-97 Nipolet

MSS Sp 97 Sweepolet

MSS sp-97 Insert Weldolet

MSS sp 97 Brazolet

 

MSS Sp-97 Coupolet

 

Category:

Description

MSS SP-97 Weldolet Manufacturer in Italy 

Masiva Metal is a trusted MSS SP-97 Weldolet manufacturer in Italy, offering precision-engineered branch fittings with accurate dimensions and durable construction. 

MSS SP-97 Weldolet Manufacturer in Belgium 

Masiva Metal manufactures MSS SP-97 Weldolets in Belgium with quality materials, precise engineering, durable construction and dependable industrial performance. 

MSS SP-97 Weldolet Manufacturer in UAE 

Masiva Metal is a trusted MSS SP-97 Weldolet manufacturer in UAE, delivering precision-fabricated branch fittings with durable materials and reliable performance. 

MSS SP-97 Weldolet Manufacturer in Spain 

Masiva Metal manufactures MSS SP-97 Weldolets in Spain, providing precision-engineered branch connections with quality materials and dependable performance. 

MSS SP-97 Weldolet Manufacturer in Germany 

Masiva Metal is a reliable MSS SP-97 Weldolet manufacturer in Germany, offering precision-engineered branch fittings with accurate dimensions and durable construction. 

MSS SP-97 Weldolet Manufacturer in South Korea 

Masiva Metal is a trusted MSS SP-97 Weldolet manufacturer in South Korea, providing quality-engineered branch fittings with robust construction and reliable performance. 

MSS SP-97 Weldolet Manufacturer in Vietnam 

Masiva Metal manufactures MSS SP-97 Weldolets in Vietnam, offering quality branch fittings with precision dimensions, durable materials and reliable industrial performance. 

MSS SP-97 Weldolet Manufacturer in Philippines 

Masiva Metal is a trusted MSS SP-97 Weldolet manufacturer in the Philippines, delivering precision-engineered branch fittings with durable construction and dependable performance. 

MSS SP-97 Weldolet Manufacturer in Saudi Arabia 

Masiva Metal is a reliable MSS SP-97 Weldolet manufacturer in Saudi Arabia, offering durable, precision-engineered branch fittings for demanding piping applications. 

MSS SP-97 Weldolet Supplier in Italy 

Masiva Metal is a reliable MSS SP-97 Weldolet supplier in Italy, providing quality branch fittings for industrial piping applications. 

MSS SP-97 Weldolet Supplier in Belgium 

Masiva Metal supplies MSS SP-97 Weldolets in Belgium with accurate dimensions, quality construction and reliable solutions for piping systems. 

MSS SP-97 Weldolet Supplier in UAE 

Masiva Metal is a dependable MSS SP-97 Weldolet supplier in UAE, offering quality fittings in various sizes and specifications for piping applications. 

MSS SP-97 Weldolet Supplier in Spain 

Masiva Metal is a trusted MSS SP-97 Weldolet supplier in Spain, supplying durable fittings with precise dimensions for industrial piping requirements. 

MSS SP-97 Weldolet Supplier in Germany 

Masiva Metal supplies MSS SP-97 Weldolets in Germany with dependable quality, precise engineering and reliable solutions for industrial piping systems. 

MSS SP-97 Weldolet Supplier in South Korea 

Masiva Metal supplies MSS SP-97 Weldolets in South Korea with accurate dimensions, durable construction and dependable piping solutions. 

MSS SP-97 Weldolet Supplier in Vietnam 

Masiva Metal is a dependable MSS SP-97 Weldolet supplier in Vietnam, providing quality fittings in multiple sizes and specifications for piping systems. 

MSS SP-97 Weldolet Supplier in Philippines 

Masiva Metal supplies MSS SP-97 Weldolets in the Philippines with quality materials, accurate dimensions and reliable solutions for industrial piping applications. 

MSS SP-97 Weldolet Supplier in Saudi Arabia 

Masiva Metal is a trusted MSS SP-97 Weldolet supplier in Saudi Arabia, providing quality fittings with precise dimensions and dependable performance. 

Customer Reviews

No reviews yet.

Related products